- Products
- Catalogs
- News & Trends
- Exhibitions
MIU10
MIU10
- The MIU10 amplifier is designed for measuring high DC currents in power distribution systems, particularly for public transport networks.
- It offers high voltage isolation to ensure safety for both equipment and personnel.
- Available in a standard version with setting selection and a fixed setting version upon request.
- Supply Voltage: 24 to 230 VDC ± 20% and 24 to 230 VAC ± 10%.
- Input Sensitivity: ± 60, 90, 150, 300, 500 mV, 5 V.
- Output Voltage: Us nom ± 5 V.
- Output Current: Is nom ± 20 mA or Is 4 ... 20 mA (If input = 0, Is = 12 mA).
- Maximum Load Resistance: 600 ohms.
- Error on Gain and Non-linearity: Less than ± 0.1%.
- Cut-off Frequency: Greater than 5 kHz.
- Voltage Consumption: Less than 5 VA.
- Residual Ripple: Less than 10 mVeff.
- Galvanic Isolation: EN50124-1 standard, with 3-port isolation between input, output, and power supply.
- Operating Temperature: -25 to +85 °C.
- Galvanic Isolation Levels: 10 kVAC 50 Hz 1min (with 16 settings) and 15 kVAC 50 Hz 1min (with fixed setting).
- EMC Standards: EN50121-5 (when mounted in a cubicle) and EN61326 class B (standard for isolators).
- Dimensions: 90 x 22.5 x 118 mm (H, W, D).
- Weight: 180 grams.
- Sealing: IP 40 (Housing).
- Mounting: DIN rail.
- The MIU10 is compatible with Sécheron’s MIU6 amplifier, providing a compact and reliable solution for current measurement in high voltage environments.
Catalog excerpts
MIU 10 - Isolated amplifier Current measurement
Open the catalog to page 1
Application The MIU10 amplifier is suitable for measuring high DC currents in power distribution systems for public transport networks. The MIU10 measuring equipment, with its high voltage isolation, ensures safety for the equipment and for the personnel. Main features • • • • • • Wide supply voltage range Low non-linearity error Very high immunity High galvanic isolation up to 15 kV Compact solution Signal level compatible with Sécheron’s MIU6 amplifier Technical data Supply voltage Input sensitivity Output voltage Output current Error on gain and non-linearity Less than ± 0.1 % < 50 ppm/K full...
Open the catalog to page 2All Secheron catalogs and technical brochures
SPL8 Pages
CONTACTOR RANGE Type SEC12 Pages
BMS15.188 Pages
BMS15.0023 Pages
IS8 Pages
BW10 Pages
Pneumatic interlocking valve4 Pages
BTE03.048 Pages
MMC2 Pages
Wheel Flange lubricator9 Pages
Transformer - Rectifer Group4 Pages
MBS (IEEE/ANSI standards)8 Pages
MBS8 Pages
SEPCOS8 Pages
VM122 Pages
VM102 Pages
Short-circuit testing4 Pages
Substations in Containers2 Pages
Wayside Panels2 Pages
VLD4 Pages
Inverter4 Pages
HPB45, HPB608 Pages
UR15-444 Pages
GB - G9 Pages
Master Controllers8 Pages
IS series8 Pages
SW series12 Pages
BTE 03.048 Pages
XMS 40.084 Pages
BSV4 Pages
RS series8 Pages
HSb4 Pages
BMS 08_088 Pages
UR6-3112 Pages
AC MODBOX®2 Pages
BVAC4 Pages
MACS8 Pages
- Single-pole switch
- Mechanical lock
- Spray tip
- Liquid nozzle
- Circuit breaker
- Technology switch
- Isolator switch
- Multipole switch
- Door lock
- Key lock
- Electromechanical switch
- Safety electric switch
- Contactor
- Multipole disconnect switch
- Safety lock
- Switchgear
- Current circuit breaker
- 3-pole switch disconnector
- Voltage circuit breaker
- Voltage switchgear