for DC Traction Energy Recovery

INVERTER FOR DC TRACTION ENERGY RECOVERY Sécheron systems for energy recovery As a prospective part of Sécheron product portfolio, Sécheron is able to provide technical studies and solutions for energy recovery systems for DC traction systems. These professional studies and solutions are intended for traction systems typically of nominal voltages 600, 750, 1500 or 3000 VDC (in accordance with system definitions noted in the standard EN50163). Sécheron’s energy recovery systems can also be built to operate outside of these voltage classes, depending on definitions provided by the system operator...

General features The Sécheron’s energy recovery systems are intended for wide field of applications (trams, trolleybuses, metro systems, trains) where recovered energy differs by application. The system is mostly designed to be installed inside a supply substation where also supply AC grid is presented. Another important criterias to be taken into account for a cost-effective design are for example ambient temperature, altitude, special demands (tropicalization, special protection, etc.). List of typical standards used for reliable solution: • IEC61000 • IEC61800 • IEC60146 • IEEE519 • EN50328...

Sécheron SA Rue du Pré-Bouvier 25 1217 Meyrin - Geneva CH-Switzerland This document is not contractual and contains information corresponding to the level of technology at the date of printing. Sécheron reserves the right to modify and/or improve the product, whose characteristics are described in these documents, as required by new technology at any time. It is the purchaser’s responsibility to inform himself, no matter what the circumstances, of the product’s maintenance conditions and requirements. Sécheron reserves all rights, especially those arising from our “General Delivery Conditions”....