MPS Water quality monitoring
8Pages

{{requestButtons}}

Catalog excerpts

MPS Water quality monitoring - 1

MPS-PTEC Dipper-PTEC Water quality monitoring Multiparameter measuring systems for ground and surface water • • • Water level Temperature Conductivity - Total dissolved solids (TDS) - Salinity - Density Dissolved oxygen - oxygen saturation pH value Redoxpotential Ammonia Nitrate Chloride Ammonium Sodium Calcium Fluoride Potassium Chlorophyll a Cyanobacteria Rhodamine WT Turbidity - total suspended solids (TSS)

Open the catalog to page 1
MPS Water quality monitoring - 2

Electric contact meter KLL-Q-2 measuring in ground water FlashCom/LogCom online-measuring in ground water stationary online measuring station Multiparameter sensors MPS MPS -PTEC / -D8 / -K16 and MPS-Qualilog -8 / -16 Equipped with up to 12 sensors, by which 16 different water quality parameters can be measured, the SEBA multiparameter sensors provide reliable informations about the conditions at the measuring site. water) or with the SEBA MPSChecker (mainly for surface water). Continuously monitored measuring sites can be equipped with SEBA data loggers with or without data transmission...

Open the catalog to page 2
MPS Water quality monitoring - 3

MPS-Checker-2 measuring in surface water Measuring in spring discharges Product overview Multiparameter sensors Multiparameter sensors DEMASdbdata loggerDEMASvis with integrated und DEMASdb und DEMASvis minimum Ø usage in ground water / surface water water level (pressure) - total dissolved solids TDS - water density fluorometer for chlorophyll or cyanobacteria or rhodamine WT 16 signal at water contact (KLL) turbidity - total suspended solids TSS 7 sensors out of No. 5 -16 can be selected additionally oxygen - oxygen saturation 2 sensors out of No. 5 -14 can be selected additionally...

Open the catalog to page 3
MPS Water quality monitoring - 4

Technical data Sensor type sensor body supply voltage - with optical sensors Decisive customer advantages • High flexibility: Connection facility to different terminal devices for mobile and/or stationary application Quick and uncomplicated exchange of exhausted electrodes Inteligent modular system: Individual retrofitting of further parameters within a series anytime possible Compact design: Useable in pipes with minimum 1½“ and 4“ (MPS-K) diameter New optical sensor technology: Measurement of dissolved oxygen, cyanobacteria, chlorophyll A and rhodamine WT Accessories Calibration liquids...

Open the catalog to page 4
MPS Water quality monitoring - 5

Evaluation software DEMASvis DEMASvis is an elaborate software solution for visualization and editing of measurement results: • • • Graphics and lists at a glance! Input option for comments Automatic correction of hydrographs and lists via check values Application variants - portable systems MPS-PTEC Dipper-PTEC Application variants - stationary systems

Open the catalog to page 5
MPS Water quality monitoring - 6

Österreich, Italien Application examples e Hydrogeologie stellt einen besonderen Schwerpunkt bei Plannung und Bau des BBT dar. Man befürchtete s Versiegen oder Verminderung der Wasserlieferungen der ansässigen Quellen. Regelmäßig wird daher im ge der wasserwirtschaftlichen Beweissicherung die Wassermenge, die Wasser-temperatur und die tfähigkeit des Wassers untersucht. An anderen Messstellen Portable systemsüberwacht. water wird kontinuierlich for ground Portable systems for ground water eferung & Leistung meter KLL-Q2 is a unique mobile The SEBA electric contact field laboratory for...

Open the catalog to page 6
MPS Water quality monitoring - 7

Application examples Stationary systems in ground water Stationary systems in storage reservoirs Monitoring of ground water quality becomes more and more important globally. By using SEBA multiparameter sensors together with data logger (e.g. LogCom or FlashCom) water quality can be monitored network-independent continuously, online (GSM/ GPRS) or offline. Permanent measurement of water quality in lakes and storage reservoirs is mostly performed by means of moored buoys or pontoons. The multiparameter sensor is dangled at a certain water depth, the complete electronics is installed...

Open the catalog to page 7
MPS Water quality monitoring - 8

Technical data Parameter Measuring range water level total dissolved solids (TDS) water density oxygen saturation 0...400 % saturation Temperature: 0...50 °C Pressure: 0...10 bar turbidity (optical) 0...1000 NTU & 0...5000 NTU Temperature: 0...50 °C Pressure: 0...10 bar with wiper 0...20 bar without wiper Total suspended solids (TSS) approx. 5 fold measured range turbidity mg/l Temperature: 0...50 °C Pressure: 0...10 bar with wiper 0...20 bar without wiper (optical) - Phycocyanin (PC) - Phycoerythrin (PE) (optical) +/- 3 % +/- 1 % of the respective end of measuring range +/- 0.0125 % of the...

Open the catalog to page 8

All Seba Hydrometrie GmbH & Co. KG catalogs and technical brochures

  1. HDA-Pro

    2 Pages

  2. Product folder

    214 Pages

  3. DS (T)

    2 Pages

  4. Dipper-PT

    8 Pages

  5. Dipper-PTEC

    8 Pages

  6. PS-Light-2

    4 Pages

  7. SlimCom

    2 Pages

  8. Software Q4

    4 Pages

  9. UnilogCom

    2 Pages

  10. HDA-Tablet

    2 Pages

  11. ModCom

    2 Pages

  12. SlimLogCom

    4 Pages

  13. NetLogCom

    8 Pages

  14. IridiumSat

    2 Pages

  15. Checker-2

    4 Pages

  16. Q-Boat 1800

    2 Pages

  17. UnilogLight

    2 Pages

  18. Unilog

    2 Pages

  19. LevelSens

    2 Pages

  20. Q-Boat 1250

    4 Pages

  21. MPS-TEC

    2 Pages

  22. KLL-(Q)-M1

    4 Pages

  23. FlowSens

    4 Pages

  24. KLL-S

    2 Pages

  25. KLL-Q-2

    4 Pages

  26. KLL-Light

    2 Pages