Mobile Discharge Measurement Systems
8Pages

{{requestButtons}}

Catalog excerpts

Mobile Discharge Measurement Systems - 1

Mobile Discharge Measurement Systems serves for determination of current velocities • • • Exact flow velocity measurement Operation possible on rod, with mobile bridge jib and cable way installationes Well - proven technology since decades

Open the catalog to page 1
Mobile Discharge Measurement Systems - 2

Universal Current Meter F1 The serves for determination of current velocities in water SEBA - Universal Current Meter F1 courses, canals, rivers and the sea, for use with rods or as cable-suspended meter equipment from 0,025 m/s up to 10 m/s. Advantages: • application of absolutely anti-corrosive materials • low starting speed of 0,025 m/s • almost frictionless contact transmission • unit composed system Description: The SEBA-Universal Current Meter F1 serves for use on rods (pic. 1, 2, 3) as well as for cable-suspended-current meter equipments (pic. 4, 5) for use with SEBA single drum...

Open the catalog to page 2
Mobile Discharge Measurement Systems - 3

Fields of application: There are different current meter equipments available for the manifold measuring problems. The SEBA Universal Current Meter F1 on rod is often used in brooks or rivers with low water levels and current velocities. The following possibilities are available: 1. Fastening the meter body directly on rod 20 mm Ø (stainless steel) and using a direction indicator (pic. 1) 2. Fastening the meter body on a relocating device (made of aluminium) in connection with rod 20 mm Ø (pic. 2) 3. Fastening the meter body on rod 20 mm Ø and using a stabilizer tailpiece with special clamp...

Open the catalog to page 3
Mobile Discharge Measurement Systems - 4

Mini Current Meter M1 The SEBA-Mini Current Meter M1 serves for determination of the current velocities in laboratories, river models, brooks, small rivers with low water level and for tubes with small diameters. Special advantages: • universal application • low starting speed • frictionless contact transmission • non-corrosive materials • unit composed system Instrument case: The Mini Current Meter is stored with its spare parts and accessories - without signal counter - in a weatherproof aluminium case. You will find the parts clearly arranged in a deep drawn plastic tray. (pic. 8)...

Open the catalog to page 4
Mobile Discharge Measurement Systems - 5

Mini Current Meter M1 on rod 20 mm Ø and relocating device: Guiding device: Generally a measurement will be effected on rod 9 mm Ø. This rod is manufactured from non-corrosive steel, in 3 parts and has a total length of 1,5 m. A base plate for the rod is attached. On request a cm-division and a dm-graduation of the rod is possible. For measurements on rod 20 mm Ø resp. with relocating device, a special clamp is available (pic. 6). Contact transmission: One signal is generated from each revolution of the propeller. The reed-switch for transmission of the propeller revolutions is composed...

Open the catalog to page 5
Mobile Discharge Measurement Systems - 6

Technical data Universal Current Meter F1 Impeller: Measurement principle: mechanical (dry reed contact) Measuring range: Blade diameter: Blade pitch: Material: Anodised aluminum Glass fiber-reinforced polyamide Universal current meter body: Corrosion-resistant stainless steel Locking screw (adaptable to the 20mm wing bar) Spacer for loading weight Wing bars: Stainless steel dm (standard), cm without (optional) Loading weight: Technical data Mini Current Meter M1 Blade: Measurement principle: Mechanical (dry reed contact) Measuring range: 0.025 - 5 m/s (dependent on the impeller blade)...

Open the catalog to page 6
Mobile Discharge Measurement Systems - 7

Single Drum Winch SEW II, SEW II-100 For measurements from bridges and boats the SEBA - Single Drum Winch SEW II with jib is used together with the cablesuspended current meter equipment. It is portable and for universal applications. Advantages: • Mobile: The compact design and relatively light weight of SEWII (12 kg) permits independent flow measurement of stationary cable crane systems with impellors and a load of 5 kg to a maximum of 100 kg. As a standard, SEWII can be operated mechanically and therefore independently of the mains. Variable: The SEWII can easily be adapted both to a...

Open the catalog to page 7
Mobile Discharge Measurement Systems - 8

Z6 counting device Description of Product: With this full-electronic counter it is possible to receive frequencies for all flow velocities. The impulses generated by the current meter are added and indicated in relation to the preselected time. The timing starts from the first impulse. With the basic version, the impulses can be counted in freely pre-definable measurement intervals. Optionally, the impulse number to be counted can be pre-selected (Z6-I). A further option is the direct calculation of the current velocity by means of pre-definable equations (Z6-V). There are several memory...

Open the catalog to page 8

All Seba Hydrometrie GmbH & Co. KG catalogs and technical brochures

  1. Product folder

    214 Pages

  2. DS (T)

    2 Pages

  3. Dipper-PT

    8 Pages

  4. Dipper-PTEC

    8 Pages

  5. PS-Light-2

    4 Pages

  6. SlimCom

    2 Pages

  7. Software Q4

    4 Pages

  8. UnilogCom

    2 Pages

  9. HDA-Tablet

    2 Pages

  10. ModCom

    2 Pages

  11. SlimLogCom

    4 Pages

  12. NetLogCom

    8 Pages

  13. IridiumSat

    2 Pages

  14. Checker-2

    4 Pages

  15. Q-Boat 1800

    2 Pages

  16. UnilogLight

    2 Pages

  17. HDA-Pro

    2 Pages

  18. Unilog

    2 Pages

  19. LevelSens

    2 Pages

  20. Q-Boat 1250

    4 Pages

  21. MPS-TEC

    2 Pages

  22. KLL-(Q)-M1

    4 Pages

  23. FlowSens

    4 Pages

  24. KLL-S

    2 Pages

  25. KLL-Q-2

    4 Pages

  26. KLL-Light

    2 Pages