Catalogs >
Seaward >
MTS

MTS
2Pages

Catalog excerpts

Easy to use milliohmmeter 4 terminal test standards with + and - full scale values The MTS range of milliohmmeter test standards are designed for the simple and easy calibration of low resistance ohmmeters and Kelvin/Thomson bridges. The four terminal resistance values are switch selected and provision is made + and - full scale values. A four terminal zero value may also be selected, thus making zero and full scale calibration of instruments simplicity itself. Three models are available, the MTS1A which has 11 values from 1mΩ to 100kΩ and the MTS2 has 10 values from 400µΩ to 400kΩ, making it ideally suited for the calibration of digital instruments with a long scale length of 4,000 or 6,000 count. The MTS3 is designed for easy calibration for units such as the Cropico DO7010, where a pulsed current is produced. The test standards are housed in a rugged bench portable aluminium case with tilt handle. The internal standards are manufactured from premium quality resistance wire with low temperature and load coefficients. The units are supplied complete with a calibration certificate. Key Features n True 4 terminal standards n Switch selectable values n Polarity reversal switch n Four terminal zero n Three models available: MTS1A: 1mΩ to 100kΩ MTS2: 400µΩ to 400kΩ MTS3: 5mΩ to 5Ω n Supplied complete with calibration certificate Ideal For n Service/calibration departments www.seaward.co.uk/MTS For USA, Canada and Mexico enquiries Tel: +1 (813) 886 - 2775 For all other enquiries Tel: +44 (0) 191 587 8741 Email: sales@seaw

Open the catalog to page 1

SEAWARDTechnical Specifications Power Max (W) 0.1 0.1 0.6 0.6 0.43 0.45 0.475 0.56 0.625 0.25 0.1 The MTS3 is not intended to be used for measurements where a continuous current is used Terminal 4mm binding posts will accept spade tags and 4mm banana plugs. Low thermal EMF types are used for the potential terminals Switches Combination switch with low thermal contacts for the potential selection and low resistance contacts for the current selection General Specifications Dimensions 215 x 88 x 250mm / 8.5 x 3.5 x 9.8” (w x h x d) approx Mass 2.8kg/6lbs approx Part Numbers MTS1A 930240...

Open the catalog to page 2