Key Features ■ Low capacitance and low inductance design ■ High accuracy 0.02% ■ Suitable for DC or AC current ■ High stability <±0.01% over many years Ideal For ■ Calibration houses ■ Research and development departments High accuracy, cost effective 4 terminal calibration resistor This range of low cost 4 terminal calibration resistors combine high accuracy, class 0.02, long term stability and permanence of calibration in a compact unit. Constructed using carefully selected low temperature coefficient Manganin or Zeranin wire, depending upon value and mounted to ensure mechanical stability, these resistors will provide a cost effective addition to any laboratory or workshop. Typical applications include calibration reference, accurate current measurement, instrument calibration and accurate shunt resistors. Dimensions 38 x 97 x 41mm / 1.5 x 3.8 x 1.6” (h x w x d) (61mm/ 2.4” with terminals - approx) Mass 250g / 9oz approx Max Operating Voltage 70VDC, 33Vrms Services 1 year warranty (subject to product registration with Seaward. Visit www.seaward.co.uk/register-product) Service and calibration by Calibrationhouse. Go to www.calibrationhouse.com for more information Resistivity material Nominal voltage at voltage taps 6mV 12mV 30mV 30mV 60mV 100mV 140mV 200mV 300mV 500mV 600mV 1V 1.5V 2V 3.5V 5V 7V 10V 15V 20V 35V 45V 40V 70V 100V 140V 200V 300V www.seaward.co.uk/CR For USA, Canada and Mexico enquiries Tel: +1 (813) 886 - 2775 For all other enquiries Tel: +44 (0) 191 587 8741 Email: [email protected]