RapsodyBox
4Pages

Commercial document Description: SDT RAPsodyBox is a signal generator tool that can be used to repeatedly reproduce a series of scenario that can be encountered in industry. These scenarios can be used to explain the use of SDT measurement devices and show their possibilities as well as analyze the expected behavior on the measurements during machine maintenance, lubrication, leak detection, tightness inspection ... SDT RAPsodyBox can also be used to reproduce specific recorded signals (using SDT instruments) encountered on the field (for demonstration and training purposes). As the signals are known, the box also makes it possible to carry out a series of functional tests on the sensors and the devices to check and control the integrity of the measurements (for testing and conformity purpose). 1. Structure borne transducer 2. Airborne resonant transducer 3. Push button 4. Micro USB type B 5. Status indicator light Specifications: General Function Software Operable with Transmitting sources Power supply Communication Environmental Ultrasound signal generator SDT RapsodyBox on PC windows SDT devices Contact and airborne Micro USB type B USB or Bluetooth SDT International sa-nv • Bd de l’Humanité 415 • B-1190 Brussels (Belgium) • Tel: +32(0)2 332 32 25 • info@sdt.be • www.sdtultrasound.com • CE VAT: BE 0418.020.213 KBC BE35 4364 1311 1137 BIC KREDBEBB • BNP Paribas Fortis BE38 2930 3455 3172 BIC GEBABEBB18A • ING BE31 3631 0661 4255 BIC BBRUBEBB CBC BE03 7320 3539 8684 BIC CREGBEBB • BNP PARIBAS France FR76 3000 4023 2300 0113 8083 378 BIC BNPAFRPPNFE • General conditions on w

Operating temperature range *for the System on chip BCM2835 IP rating Approvals 40 EMC compliant (directive 2014/30/EU) ROHS compliant (directive 2011/65/EU) Mechanical Housing material Dimensions Anodized aluminum profile / plastic lid: ABS Weight Signal output (typical) Structure borne Resonant frequency Thread Signal amplitude range Airborne Resonant frequency Bandwidth (attenuation of -6dB) Transmitting sound level *at max volume Total beam angle (- 6 dB) Response curves: Typical response curve of Structure borne transducer:

Typical Response [mm/s] Normalized to 37 kHz 50 40 30 Typical response curve of airborne transducer: Typical Response Normalized to 40 kHz 0 35 Safety recommendations: • Do not expose the equipment to rough handling or heavy impacts • Always read and follow the user manual • Opening the housing of the instrument may result in hazardous mishandling and voids warranty • The equipment should not be used in areas where there is a risk for explosion

• Do not expose the equipment to high humidity or direct contact with water • All repair work must be performed by SDT or authorized services • Using any other headset or any sensor than the one supplied with the instrument can cause internal damage to the device NB: Additional specifications could be found from the download section of SDT web site: www.sdtultrasound.com Modified version Original version The information herein is believed to be accurate to the best of our knowledge. Due to continuous research and development, specifications are subject to change without prior notice.