FTA Automatic Dynamic Wrench Tester

Product catalog summary

Overview: The document presents advanced tightening solutions for quality control and production, focusing on the FTA series of automatic torque/angle wrench testers by SCS Concept. These solutions are designed to enhance the accuracy and efficiency of torque wrench testing.

Specifications:

Models: FTA 300 (3 – 300 N·m), FTA 600 (6 – 600 N·m), FTA 1000 (10 – 1000 N·m)
Torque Accuracy: 0.5% of measured torque across the full range
Power Supply: 220 VAC with an optional 110 VAC, includes internal batteries for PC power supply
Monitor: 15” touchscreen with a resolution of 1024x768

Procedures:

The FTA transducer can be adjusted to test wrenches with extensions, allowing for evaluation of extension bending effects on angle measurement.
Automatic testing of torque/angle wrenches is conducted according to VDI/VDE 2645 part 2 and VDI/VDE 2647 standards.
Cm-Cmk tests are performed for torque and angle measurements, ensuring precision and reliability.
Torque preload values can be set for angle verification and calibration tests.

Features:

Automatic test mode for torque/angle wrenches
Capability to test torque wrenches with extensions
Remote control via a pendant control box

Recommendations: For specific model dimensions and further technical details, users are advised to contact their local distributor. Continuous product improvement may lead to modifications in technical characteristics without prior notice.

Catalog excerpts

Technical data Models: FTA 300 (3 – 300 N·m), FTA 600 (6 – 600 N·m), FTA 1000 (10 – 1000 N·m) Torque accuracy: 0.5% of measured torque on the full range Advanced Tightening Solutions for Quality Control & Production Discover simplicity Power supply: 220 VAC (optional 110 VAC) Internal batteries for PC power supply Monitor: Touchscreen 15”, resolution 1024x768 Note: the dimensions refer to the bench FTA 30 - 300 N·m For other models (capacity) FTA please contact your local distributor. Discover simplicity SCS Concept Italia S.r.l. [email protected] www.scsconcept.it Q-Direct GmbH [email protected] www.q-direct.eu SCS Concept France SAS [email protected] www.scsconcept.fr SCS Concept Americas LLC [email protected] www.scsconcept.com Willing to constantly improve its products, SCS reserves the right to modify the data and technical characteristics described above without notice. SCS Concept Latin America Ltda [email protected] www.scsconcept.br.com Automatic torque/angle wrench tester Advanced Tightening Solutions for Quality Control & Producti

Open the catalog to page 1

FTA Test of torque/angle wrenches FTA bench performs Cm-Cmk test of torque wrenches with angle measurement. The test is run automatically. In the compared test mode, the reference measure from the bench is compared with the wrench measure and interpolated to make the measure objective. With FTA is possible to set a torque preload value to perform angle verification/calibration test - Automatic test torque/angle wrenches Test of torque wrenches with extensions - Test according to VDI/VDE 2645 part2, VDI/VDE 2647 - Cm-Cmk measurement on torque and angle - Torque wrench angle verification The FTA...

Open the catalog to page 2

FTA Automatic Dynamic Wrench Tester

FTA Automatic Dynamic Wrench Tester

Catalog excerpts

All SCS Concept Group catalogs and technical brochures