Ammonia Cracker for gas of process and/or burning system 3 sizes: GCJM-1: 5.4 kW (horizontal) GCJM-2: 10.8 kW (vertical) GCJM-3: 21.6 kW (vertical) Technical characteristics • • • • • • • • Power supply : 3 x 400V Heating power : 5.4 / 10.8 / 21.6 kW Gas capacity : up to 17.5 m3 NH3 pure Touch screen regulator with integrated PLC : SCR3000 Safety temperature limiter : JUMO TB/TW Gas Inlet : 1/2’’ G Heating time : about 20 minutes from 20 to 950°C Dimensions : 720 x 740 x 1440 mm (GCJM-1) 2000* x 750** x 775 mm (GCJM-2) 2000* x 750** x 775 mm (GCJM-3) *Height +400mm with burner ** Width +175 with process gas cooler option Specifications For gas process • NH3 Inlet : 1.5 bar (with maximum 50 ppm H2O) Note: a filter before the ammonia inlet is recommended. • Residual ammonia in cracked gas < 200 ppm (<50 ppm in option) For burning system • Equipped with an electrical burner (3 controlled electrical sparks) Note: A saved power supply for the burner is recommended. • Environmental rejection conforms to European Norms and certified by Bureau Veritas and Apave. NH3 rejection level < 0.0042 g/hour (limit 10 g/h) NOx rejection level = 46.3 mg/Nm3 dry (limit 100 mg/Nm3 dry)