Introduction
Crystic Mouldguard is a peelable, temporary protective coating designed to protect moulds and mouldings from environmental damage such as water, UV light, dirt, and frost. It is particularly useful for decommissioned moulds stored outdoors, preventing damage and reducing the need for repairs.

Features and Benefits

• Protects moulds from damage, reducing repair costs.
• Saves time and costs in labour and materials, allowing quick return to production.
• Easy application with 2% MEKP catalyst, applied by brush or spray.
• Quick curing and easy removal by peeling.
• Weather resistant for over 12 months.
• Suitable for FRP and steel surfaces.

Application Guide

• Apply at a thickness of 0.5 - 0.6mm, using 600-700g/m2.
• Ensure uniform catalysing and remove trapped air during application.
• Coat fully, including flange areas, and allow to cure before storage.
• Check release degree before production use.

Typical Properties

• Appearance: Pink Coloured
• Viscosity: Thixotropic
• Specific Gravity: 1.12
• Volatile Content: 29%
• Stability: 3 months in the dark at 20°C
• Geltime: 15 minutes at 25°C with 2% Catalyst

Customer Endorsements

• Positive feedback from various companies, highlighting time savings and surface protection.
• Endorsed for use on all moulds for outside storage by several companies.

Contact Information
Scott Bader provides contact details for various global offices, ensuring accessibility for customer support and inquiries.