Catalogs >
SCM >
nova si x

nova si x
4Pages

Catalog excerpts

nova si x Circular saw with ±46° double tilting. Finally available at everybody’s reach. With powered and programmed sawblade movement available as standard. It allows simultaneous use of a 400mm saw blade and 160mm scoring blade both for 90° cutting and ±46° tilted cutting, guaranteeing the maximum cutting height on veneered panels and solid wood. Max. sawblade projection from table at 90°/+45°/-45° Cutting width on parallel fence Squaring stroke Three-phase motor power Maximum sawblade diameter with scoring unit installed Total sliding table stroke 3200 Total sliding table stroke 2600

Open the catalog to page 1

operating groups double tilting at everybody’s reach Saw unit. New saw unit with a stiff cast-iron structure which can accommodate a blade of 400 mm diameter with scoring blade mounted. It ensure a perfect and easy cutting of veneer panels and thick solid wood material with very high thickness both at 90° and tilted cuts at ±46°. The saw blade uses 100% of the motor power, thanks to the scoring blade with an independent motor as standard. The scoring blade is adjustable from the outside without tools and allows fast and accurate positioning with no play. Programmed movement. The “Ready”...

Open the catalog to page 2

immediate control Squaring Frame and Fence. Panel loading is easy on the large squaring frame with an idle roller at the end. The telescopic squaring fence with the inclined metric scale and two reversible stops can be used to square panels measuring 3200 x 3200 mm and for miter cuts at up to 45° on both sides of the frame. unrivalled cutting finishing Sliding Table. Optimal support also to larger pieces, with the new sliding table 360 mm wide. Exceptional precision and smoothness: to secure the guides it is not used glue,since the thickness could affect sliding. They are secured with a...

Open the catalog to page 3

main optional devices Ready 3 / Ready 3 UP 2 sawblades speeds The two sawblade rotating speeds (3500 - 5000 rpm) are controller by inverter. To rapidly obtain angular cuttings with automatic self-adjusting of the stop postion. SCM GROUP SPA - via Casale 450 - 47826 Villa Verucchio - Rimini - Italy +39 0541 674111 - scm@scmgroup.com - www.scmwood.com Digital readouts On squaring stops with micrometric adjustment. In this catalogue, machines are shown in CE configuration and with options. We reserve the right to modify technical specifications without prior notice, provided that such...

Open the catalog to page 4