morbidelli m400
28Pages

morbidelli m400 numerical controllled machining centre Casern woodworking technology

morbidelli m400 numerical controlled machining centre THE SOLUTION THAT COMBINES QUALITY AND TECHNOLOGY Modular machining centre designed and developed to satisfy the requirements of furniture manufacturers.

TOTAL LACK OF VIBRATIONS: MOBILE GANTRY STRUCTURE Performance without comparison with the mobile gantry structure that allows for high machining speeds whilst guaranteeing the best end products quality. THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY: PHOTO-BUMPERS High production capacity and greater freedom of movement also during alternated work process due to the safety system that brings together the bumpers devices with the photocells for the detection of the operator's position inside the loading/unloading area. SUPERIOR TECHNOLOGY FOR MACHINING WITH 5 AXES: PRISMA...

morbidelli m400 machining unit: routing unit Vertical, horizontal, tilting machining and large dimensioned cuts with blade with 3-4-5 axes routing units up to 15 kW motor power. POWERFUL AND RELIABLE Ease-of-use and flexibility with the 5-axes machining unit, unique in its category in terms of performance. Wide range of specific electrospindles to carry out any type of machining. Prisma machining unit geometry allows it to operate at angles of up to 10° below the work piece supporting surface.

Production of doors and other horizontal machining that require heavy duty routing (grooves, hinge or lock recesses), with high precision and speed, by means of the two outlet horizontal spindle. High quality finish even on heavy machining with the exclusive TTS (Total Torque System) lock system, that provides the spindle with the stiffness of a 3-axes unit. Clean working environment with the conveyor facilitating removal of shavings and sawdust produced by machining.

morbidelli m400 machining unit: drilling unit The higher drilling capacity in its category up to 25 independent vertical spindles and 12 horizontal spindles, complete with blade unit. INDESTRUCTIBLE AND WITH LOW MAINTENANCE The sturdiness of drilling heads is proven by the reduced maintenance costs: it is recommended only after more than 1000 hours of work. THE PERFECT DRILLING: RO.AX SPINDLE Zero play during machining with the new RO.AX technology (Rotoaxial spindle technology), the most efficient spindle on the market with rotation speeds up to 8000 rpm. Easy grooves machining on the...

morbidelli m400 tool changers Wide range of tools available to the operator with the rear RAPID 16 or 24 positions tool changer. TR side tool changer with 10 or 12 positions.

machine management Consolle with integrated PC “eye-M” Industrial PC with multi-touch colour display, 21,5” screen size, Full HD, positioned on a support base with displacement wheels, for an easy handling of the mobile console along the machine perimeter. “ALL” AT YOUR FINGERTIPS: TECPAD CONTROL Management of machine controls with the 7” colour remote control with touch-screen function that facilitates and speed up the setting op

morbidelli m400 bars work table SET UP TIMES IN MASKED TIME: TV MATIC WORK TABLE Work table with automatic simultaneous positioning of bars and suction cups or clamps. The requested configuration is performed in just a few seconds with a guaranteed safety against the risks of collision between tool and work table. Simple and quick substitution of suction cups or clamps through the exclusive rapid docking device. From a single panel can be obtained more elements and automatically re-position them to carry out all machining without interrupting the production cycle; at the end the work pieces...

TOTAL CUSTOMISATION: TV FLEXMATIC WORK TABLE This automatic table allows the management of a variable number of suction cups on the bar, according to the dimensions and shape of the work piece to be machined, in order to always have the best holding without risks of collision. Available also with manual version TV FLEX). It is possible to position directly on each bar all necessary suction cups and clamps to lock the work pieces of any shape and dimension. Wide range of accessories to satisfy all machining necessities, available for all work tables.

morbidelli m400 multi-function work table VERY HIGH FLEXIBILITY: MULTI-FUNCTION WORK TABLE Extremely stiff work table made of extruded aluminium, designed to maintain a perfect planarity over time, even after repeated mechanical stresses. It is ideal also for nesting machining.

Optimal work piece holding with the high capacity vacuum up to 1000 m³/h. It is possible to fix custom references thanks to the exclusive “T-shaped” grooves available on the work table. Easy and quick positioning of locking accessories such as MPS suction cups and the practical MODULSET system with the surface channels structure. Possibility to work small work pieces with the coaxial mechanical presse

morbidelli m400 loading/unloading automation Precise and rapid panels positioning on the work table with a dedicated suction cups system. Lifting table for the management of panels stacks with height up to 700 mm.

100% productivity with the pusher that moves the processed work pieces on the unloading belt and simultaneously cleans the work table while the new panel to be machined is loaded. No dust with the upper extraction system with the work pieces cleaning and chips conveying system at the end of the belt in order to eliminate any machining waste. Perfect work pieces holding at outfeed thanks to the guides positioned on the sides that drive the panels avoiding any possibility of falling off. The chips conveying device positioned between the work table and the unloading belt maintain a clean...

morbidelli m400 loading/unloading automation Total flexibility, the cell can be also used with a “stand-alone” machining centre. The photo-bumpers safety system and the split guides allow the manual panels loading/unloading and the pendulum process to maximize the productivity. For a higher productivity, in case the material and the machining allows it, the suction cup loading device can position two overlapping panels on the work table