Accord 30 FX
20Pages

accord 30 fx CNC machining centre

accord 30 fx CNC machining centre New-generation modular machining centre designed for machining operations involving heavy duty stock removal with high precision and top quality nish. Ideal for making door and window frames, doors, stairs and solid wood elements in general. • TOTAL FREEDOM OF USE powerful, reliable machining heads with 5 interpolating axes made for any use, even the most heavy duty. • MAXIMUM PRODUCTIVITY AND SAFETY the machine is always used at its maximum production capacity without limits on movement and in total safety. • TOP QUALITY FINISH Machining with maximum...

cutting. planing. routing. sanding.

accord 30 fx technological advantages MOBILE PORTAL STRUCTURE TOTAL ABSENCE OF VIBRATIONSI designed for maximum precision even in the presence of large machining areas, guaranteeing lasting stability. MACHINING HEADS WITH TWIN INDEPENDENT Z AXIS allowing fast alternating of the units present during machining and when possible tool changes in masked time. MACHINING HEADS CAN BE CONFIGURED FOR DIFFERENT PRODUCTION REQUIREMENTS Accord 30 fx allows all types of machining to be performed, from power routing with 5 interpolating axes to high-capacity boring and the machining of door and window...

accord 30 fx machining head: main routing unit Compact and powerful, the Prisma head can use any type of tools, even large tools for intensive machining operations typical for door and window frames. A whole range of machining heads with 3 to 5 interpolating axes able to carry out all machining operations required of a machining centre. Prisma allows machining up to 10 degrees below the horizontal axis. Clean working environment with the conveyor helping to eliminate shavings and sawdust. Available for heads with 3 or 5 axes, it can be used both with single-profile tools and double-profile...

machining head: BRC multi-function unit Cutting, routing and boring both vertically and horizontally, without needing the tool changer, using the BRC unit. Fast and precise for all accessory machining, for making a door or window frame there is a single secondary unit using an independent Z axis and dedicated inverter.

accord 30 fx machining head: auxiliary unit for boring and routing The optimum solution to all boring requirements is found in the wide range of modules available for the Accord fx, with from 14 to 50 independent spindles. Faster operation, more tools available with the PB TC additional routing unit, power 8.5 kW and a 6-location Rapid tool changer. Longitudinal and transversal cuts can be made with the blade unit built into the boring head with 0-90° rotation.

tool magazines The machine is always equipped for any machining using the TRC chain magazine with 48 locations available for large and double-profile tools. Accord fx has solutions suitable for any production, such as the Rapid 12 on-board even allowing tool changes in masked time, which can be combined with additional magazines such as the Rapid 16 or 24. To have the most tools available, the rack magazine may have up to 12 locations, using the items present on the machining head.

accord 30 fx MATIC worktable Matic is the fully automatic worktable ideal for machining solid wood. Complete set-up in seconds, all bars and supports moving simultaneously, each driven by an independent motor. The many technical devices give this table lasting safety and reliability. Switching from clamps to suction cups and vice versa is fast and practical. The quick coupling perfected by SCM allows operators to switch at the press of a button, without the need for external tools.

Perfect for machining pre-finished/finished door and window frames, all supports having cleaning blowers which remove all shavings from the sliding zone and on the workpiece hold-down base during clamp changes. Workpiece loading and unloading is easy and ergonomic. They are automatically carried to the machining zone to prevent any kind of collision thanks to total worktable management.

accord 30 fx worktable with manual and guided movement The worktable with manual movement is available in the “Start” and “Pilot” versions, allowing maximum freedom of use thanks to the quick coupling system for adding and removing clamps and suction cups to always guarantee optimum hold-down. In the “Pilot” version positioning is guided and controlled by the workpiece program. Magnetic sensors detect the correct position of all components, eliminating the risk of collision. Fast operations that do not require any further checks; the display on the mobile console shows the position for each...

The worktable can be configured for machining heights of 50 mm or 110 mm with a range of clamps and suction cups for holding down and fixturing workpieces having any shape. All versions of SCM worktables use common accessories The H110 worktable allows maximum freedom of movement and always offer ideal hold-down to provide top quality with tools and even use of “double-profile” tools. finishing even with heavy duty stock removal.

The exclusive SCM multi-function worktable allows the use of a whole range of accessories designed to meet all workpiece support and hold-down requirements. The MPS system is extremely practical to use. Fixturing operations are practical and easy. The exclusive aluminium profile has grooves and holes specially designed for optimum positioning of any type of support. This work is even faster using the laser pointer which shows the precise point where the suction cups must be placed. The directly machined worktable guarantees lasting absolute precision and perfect flatness thanks to its high...

safety systems “Pro Speed” and “Pro Space” Accord 30 fx allows you to select the safety system most suitable for the customer’s requirements, in terms of available space and production methods. The systems have no floor sensor, which means the “Pro Speed” safety system: the loading area is marked off by a photocell that informs the control system of any possible operator access; the sensors on the mobile portal will only stop the machine in the event of contact. The machine can be used at its top feed speed (90m/min.) when the operator is outside the loading area. “Pro Space” safety system:...