• Maximum energy density: 150 mJ/cm²
• Maximum average power: 0.5 W
• Calibration uncertainty: ±3%
• Operating temperature range: 10°C to 50°C
• Temperature coefficient: +0.1%/K

• Power supply: ±5V to ±20V
• Noise voltage (Output): 2 mV
• Offset: Maximum 50 mV
• Offset compensation: AC-Coupling or external amplifier
• Solder time: Maximum 2 seconds per pin (no hot air soldering)

The PEO 8A and PEO 12A sensors are noted for high sensitivity and repetition rate. Their windowless design and metallic absorption coating allow usage in the UV range. They include a built-in preamplifier to reduce interference and facilitate the use of longer signal cables. Optional broadband black coating is available for different wavelengths.

• PEO 8 and PEO 8A: Aperture Ø 8 mm, Repetition rate 1 kHz (1 MOhm), Sensitivity 400-500 V/J (1 MOhm)
• PEO 12 and PEO 12A: Aperture Ø 12 mm, Repetition rate 700 Hz (1 MOhm), Sensitivity 300-400 V/J (1 MOhm)

The modular construction set EMK100 can be combined with PEO sensors for enhanced functionality.

Scitec Instruments Ltd, Bartles Industrial Estate, North Street, Redruth, TR15 1HR, United Kingdom. Tel: +44 (0)1209 314 608, Fax: +44 (0)1209 314 609, Website: www.scitec.uk.com, Email: [email protected]