Benefits: • Two Voltage Input Ranges • Two Impedance Settings • Transmit without conducting EMI • Bandwidth to >60MHz (-3dB) The LTX-510 Electrical to Optical Converter is a convenient device that is intended to transmit analog or digital signals to a remote location via a multi-mode fiber optic cable. The primary applications are those situations in which the signal of interest has a high common mode voltage with respect to the measurement equipment. These applications include plasma physics experiments, power transmission equipment, and high power laser equipment. Trigger information from electrically noisy sources such as high current discharge laser systems may be transmitted without conducting Electro-Magnetic Interference, (EMI), to the measurement equipment. The LTX-510 is intended for use with the TIA-500S Optical to Electrical Converter but can be used with other o/e converters that respond at 850 nm and have the appropriate responsivity and bandwidth. The input impedance may be set to 50 ohms for high speed signals sent over a transmission line or to 1 Megohm for use at lower frequencies. The input connector is a female BNC and the output connector is a ST style. Specifications Input V ltage Range o Input Impedance 50 ohms or 1 Megohm in parallel w ith 20 pF 10 microw atts, - 20 dBm Typical Input Without Damage Output Wavelength Input Connector Fiber Output Connector Usable Fiber Type Operating temperature 2 years from date of receipt Terahertz Technologies Inc. 169 Clear RoadOriskany, New York 13424 USA (315) 736-3642 Fax (315) 736-4078 www.terahertztechnologies.com Email: [email protected]