Catalogs >
Scitec Instruments >
Energy monitoring kit for laser OEM applications

Energy monitoring kit for laser OEM applications
1Pages

Catalog excerpts

Energy monitoring kit for laser OEM applications - 1

basis board has an own port for the power supply for the sensor. Energy monitoring kit for laser OEM applications > EMK 100 is a sensor and electronic system for an in-ternal energy measurement. It consists of a basis board including a switch-able amplifier and a peak detector. The basis board output is a trigger signal and an analogue signal corresponding to the laser energy. Additionally, we offer different modules with customer speci-fied output ports. The connectors of these modules are standardised and the boards are place under the basis board . The connectors or pads for different sen-sors, especially for the PEO series, are at the upper side of the basis board. It is also possible to place sensor and electronics separate of each other. In this case we recommend to use the amplified sensors (PEO8A, PEO12A). For such an application the Sensor internalexternal basis modul Analog OutputTrigger Output Analog U/f-Converter A/D Converter 4..20 mA 0..10 V optical Output coaxial Output CAN-Bus IC RS 232 USB Dimension (housing) 55 mm x 52 mm x 16 mm Mounting Customer specified Rep. rate 5 kHz (10 kHz on request) Power supply ұ12V .. 15V, 4-pol. Molex, grid 1,27 mm Input 4-pol. Molex, grid 1,27 mm, only for ext. sensor Output 6-pol. Molex, grid 1,27 environment 0ѰC .. 50C > Scitec Instruments Ltd з Bartles Industrial Estate North Street ׷ Redruth TR15 1HR ׷ United Kingdom Tel: +44 (0)1209 314 608 Fax: +44 (0)1209 314 609 ׷ www.scitec.uk.com scitec@scitec.uk.com size="-2">

Open the catalog to page 1