• SCION 456-GCSpecification Sheet Dimensions and Weights Height: 57 cm (22.5 in.), Width: 66 cm (26.0 in.), Depth: 56 cm (22.0 in.) Weight*: 43 kg (59lb) * Typical values Environmental Conditions Operating temperatures: 10°C to 40°C. Operating humidity (relative): 5% to 95% Line voltage requirements: 120 V, 230 V (±10% nominal) Column Oven Dimensions: 23 cm (w) x 11 cm (d) x 28 cm (h) Temperature range: • Ambient: +4°C to 450°C • Liquid CO2:-60°C to 450°C Temperature program ramps/holds: 24/25 Maximum temperature ramp rate: • 150°C/min for all voltages and 180°C/min with insert accessory Cool down rate: 400 °C to 50 °C in 4.5 minutes Temperature set-point resolution: 0.1 °C Ambient temperature reject <0.01°C change in oven for 1°C change in ambient temp. Retention Time Repeatability <0.008% or < 0.0008 min, based on n-Pentadecane under temperature programming conditions. Area repeatability < 1% RSD General Specifications Up to 9 EFC modules total, injector, detector and auxiliary Optional backflush GC Control: External events (digital output): 8 standard 8 optional, total 16 Max number of timed events: 30 # Heated zones: Standard 9 Two power outlets 24V (1A max. each) SCION Instruments 1 Bain Square, Kirkton Campus Livingston, UK EH54 7DQ

Methods: • Maximum stored internal methods: 50 (max. 30 alphanumeric characters) Logging: • Run log file (stored with the chromatogram when using CompassCDS) Error log file Local Display: • TFT full color screen • WVGA resolution (800 x 480) Size 23 cm (9”) Local Control: • Touch screen • Hard Keys Languages: • English, German, French, Spanish, Italian, Portuguese, Cyrillic, Kanji, Chinese (standard and traditional), Thai, Korean and Dutch Local automation: • Method lines: 25 • Modes: Infinite looping Dual and duplicate injection Communication Ethernet: Protocol: TCP/IP Data rate: 100 Mbps Control: • GC...

Injector Options Maximum injectors: two, operating concurrently. Pneumatics: Electronic Flow Control (EFC): • S/SL Split/Splitless injector* • PTV Programmable Temperature • Vaporizing* COC Cold On-Column injector* • Flash injector • PWC Packed/ Wide bore On-Column injector * including septum purge S/SL Split/Splitless Injector Pressure range: 0-150 psi Total flow: • 500 mL/min for N2/Ar Maximum temperature: 450°C Split range: 1-10,000 (column dependent) Suited for columns: • Wide bore: (0.53 mm) COC Cold On-Column Injector Pressure range: 0-150 psi Total Flow: 50 mL/min...

Temperature range: • Ambient + 10 °C to 450°C using air cooling • -160 °C to 450 °C using liquid N2 cooling • -60 °C to 450 °C using liquid C02 cooling Maximum temperature ramp rate: 200°C/min Temperature ramps/holds: 24/25 Split range: 1-10,000 (column dependent) Operational capabilities: • Large volume injection • Temperature ramped splitless • Cold on-column Suited for columns: • Wide bore (0.53 mm) • Narrow bore (0.05 to 0.32 mm) Maximum injection volume: 250 qL (LVI mode) Flash Injector Pressure range: 0-150 psi • Total flow: 50 mL/min (Type 23 EFC) Maximum temperature:...

Available traps: Two lengths A wide range of standard packing and custom packings Detector Options Maximum detectors: two, operating concurrently (one of which is a Single or Triple Quad MS) Pneumatics: Electronic Flow Control (DEFC) Detector types: FID Flame Ionization Detector TCD Thermal Conductivity Detector ECD Electron Capture Detector NPD NPD Nitrogen-Phosphorus Detector PFPD Pulsed Flame Photometric Detector PDHID Pulsed Discharge Helium Ionization Detector MS Mass Spectrometry (see GC/MS brochure and datasheet) Note: Data Acquisition Rate: 600Hz for all detectors, (exception pfpd) FID...

PFPD Pulsed Flame Photometric Detector Photomultiplier tube: • s/p Maximum temperature: 450 °C Detectivity: • S: 1 pg S/sec (S/p tube) • P: 100 fg P/sec (S/p tube) • N: 20 pg N/sec (S/p/n tube) Linear dynamic range: • S: 103 • Up to 23 elements can be detected PDHID Pulsed Discharge Helium Ionization Detector Detectivity: 50 ppb (Methane) Linear dynamic range: 104 (Methane) Operational quality: • Gold plated connections • Welded column connections Detectors (DEFC) Module types: 6 detector-specific modules Accuracy: ± 7 % set point flow Resolution: 0.1 or 1 mL/min Automation Options 8410...

8400 Autosampler Sample capacity: 100 x 2 mL vials Large solvent wash vial: 2 x 120 mL* Dual and duplicate mode Internal standard addition Modes of operation: • Liquid • Ambient headspace* • spme* • Sample heating and cooling* • Pre-programmed modes of injection Syringes: • 1|mL, 2 mL,5 mL,10 mL,100 mL,250 mL for liquid injection • spme * Optional Optionally a CTC-PAL autosampler, including specific options may be installed. SCION Instruments 1 Bain Square, Kirkton Campus Livingston, UK EH54 7DQ