□ Stable and torsionally rigid aluminium chassis construction with additional torsion tubes for significant payload advantage □ Maximum stability thanks to automatic lowering device □ Hard chrome-plated, high-quality front tilt cylinder □ Specially canted aluminium body for maximum impact and wear protection □ Standing platform at front wall for operating roller tarpaulin □ Installation of axles from well-known manufacturers such as SAF or BPW □ OPTIONAL: Body sizes available for different load volumes □ OPTIONAL: Continuous steel wear floor, with bolted steel frame □ OPTIONAL: QuickSilver lining with stainless steel frame and steel wear plate on rear discharge chute -for bulk goods, sewage sludge etc. □ OPTIONAL: External rear wall for higher load volume □ OPTIONAL: Roller cover - operated manually or via electric remote control □ OPTIONAL: Excavator protection with ladder and retaining brackets Schwarzmuller Gruppe | Hanzing 11 ■ 4785 Freinberg ■ Austria | Tel.: +43 7713 800-0 | [email protected] ■ www.schwarzmueller.

Fahrzeugdetails TYPE DESIGNATION 3-AXLE FULL ALUMINIUM SEGMENT TIPPER SEMITRAILER For sand, rubble, excavated earth, etc. in on-road deployment DIMENSIONS Tipper body internal length: approx. 7,350 mm Tipper body internal width: approx. 2,330 mm Tipper body internal height: approx. 1,470 mm = load volume: approx. 24 m³ Total width: 2,550 mm Loading height, unladen: approx. 260 mm over fifth-wheel coupling FRAME Welded aluminium frame construction Replaceable 2" kingpin CHASSIS Air suspension with autom. lowering device via inductive switch and lowering lock via rotary switch on semitrailer air...

or lowered according to weight, as well as forced lowering incl. integr. speed-restricted moving-off aid with button operation in cab (no button installation on our part) Tyres : 6 x 385/65 R 22.5 160J, manufacturer as per factory specifications 6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, unpainted, silver SUPPORT FIXTURES 2 steel support legs, height-adjustable (only detachable when unladen) BRAKE SYSTEM Brake system according to EC Directive 71/320 or E CE R13 Two-line brake Spring-loaded parking brake EBS - electronic brake system Wabco 2S2M = one axle sensed RSS - stability...

TIPPING SYSTEM 1 HP front press for rearward tipping, tipping angle approx. 45° 1 pipe system with screw coupling DN20 TIPPER BODY Aluminium body in semi-circular segmental construction, 6 mm floor and wall thickness 6 mm aluminium wear floor in rear area, approx. 3,500 mm from end of discharge chute, raised over floor edge at sides, welded all-round ( The service life of the wear floor depends on the tipping frequency/material ) Angled front and rear walls, in side wall height (flush for roller tarpaulin) Rear wall = hinged wall with recessed bearing and autom. mech. dual-hook central locking...

ELECTRICAL EQUIPMENT 24 V lighting system according to EC Directive 76/756/E WG 2 seven-chamber tail lights LED side marker lights 2 clearance lamps 2 contour lights 2 x 7-pin and 1 x 15-pin socket PAINTWORK unpainted - cleaned = complete chassis unpainted - cleaned = complete body Plastic and hot-dip galvanised parts unpainted, powder-coated attachments/installation parts black Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48 ATTACHMENTS Wheel chock(s) as per regulations Noise...

trapezoidal underride protection, unpainted Single wheel plastic mudguards with spray protection as per regulations Aluminium standing platform with aluminium safety grid, with guardrail and step unit, on chassis frame WEIGHTS Gross train weight (perm.): 40 t Gross weight (techn.): 39 t Axle assembly load (techn.): 27 t Fifth-wheel load (techn.): 12 t Payload: approx. 29 t Tare weight: approx. 4. 5 t ACCESSORIES Rear markings as per ECE standards Schwarzmüller Gruppe | Hanzing 11 · 4785 Freinberg · Austria | Tel.: +43 7713 800-0 | [email protected] · www.schwarzmueller.co

Stable and torsionally rigid aluminium chassis design with additional torsion tubes for considerable payload advantage Standing platform on the front wall for operating the roller tarpaulin Schwarzmüller Gruppe | Hanzing 11 · 4785 Freinberg · Austria | Tel.: +43 7713 800-0 | [email protected] · www.schwarzmueller.co

Foldable aluminium trapezoidal underride protection Inclined front wall with hard chrome-plated, high-grade front tilt cylinder Schwarzmüller Gruppe | Hanzing 11 · 4785 Freinberg · Austria | Tel.: +43 7713 800-0 | [email protected] · www.schwarzmueller.co

OPTIONAL: Dosing unit for hinged rear wall with pull-out pipe stop Rear wall = hinged wall with recessed bearing and autom. mech. dual-hook central locking Schwarzmüller Gruppe | Hanzing 11 · 4785 Freinberg · Austria | Tel.: +43 7713 800-0 | [email protected] · www.schwarzmueller.co

Aluminium wearing flooring in the rear area approximately 3,500 mm from the end of the bulk discharge chute 3-axle full aluminium segment tipper semitrailer Schwarzmüller Gruppe | Hanzing 11 · 4785 Freinberg · Austria | Tel.: +43 7713 800-0 | [email protected] · www.schwarzmueller.co

Schwarzmüller Gruppe | Hanzing 11 · 4785 Freinberg · Austria | Tel.: +43 7713 800-0 | [email protected] · www.schwarzmueller.co