SP100 EC - Eccentric Diaphragm Pumps for Gas / Air

Product catalog summary

Product Overview
The SP 100 EC is a diaphragm micro pump designed for air and gases, suitable for use as both a vacuum and pressure pump. It is motor-driven and available in various voltages (3, 5, 6, 9, 12 V DC). Key features include minimal current consumption, oil-free and maintenance-free operation, reduced vibrations, low noise, and a compact, lightweight design.

Applications
The pump is versatile and can be used in air sampling, portable gas detectors for safety devices, anaesthesia equipment, personal gas detectors, exhaust gas analyzers, pneumatics, and pipetting devices.

Technical Specifications

Operating Voltage: Ranges from 1.5 Vdc to 12 Vdc.
Free Flow Rate: Varies from 580 ml/min to 880 ml/min depending on the voltage.
Maximum Pressure: Up to 650 mbar.
Maximum Vacuum: Up to -500 mbar.
Motor Type: Standard with optional double ball bearings/brushless.
Weight: Lightweight construction.

Performance and Construction
The pump features a standard pump head with optional configurations, and diaphragms and valves made from EPDM, with options for FKM/Silicone. Performance curves indicate flow rates at various pressures and vacuums.

Mounting and Noise Reduction
To reduce noise and vibration, it is recommended to secure the pump using padded double-sided adhesive tape, Velcro tape, or by placing it in a foam-lined box.

Customization
Custom versions of the pump can be made for specific applications without additional costs.

Catalog excerpts

SP100 EC - Eccentric Diaphragm Pumps for Gas / Air-1

Eccentric Diaphragm Pumps for Gas / Air SP 100 EC Smallest Eccenter Pump World Wide! Product Features • diaphragm micro pump for air and gases • applicable as vacuum pump or pressure pump • motor driven • available in 3 / 5 / 6 / 9 / 12 volt dc • minimal current consumption • oil free / maintenance free • reduced vibrations • low noise • virtually leak tight • lightweight • extremely small size • Air sampling • Portable gas detector pump for safety devices • Anaesthesia Equipment • Personal gas detector / Gas monitor • Exhaust gas analyser • Pneumatics • Pipetting device Am Lichtbogen 7 • 45141 Essen • Germany Phone: +49 201 31697-0 • Fax: +49 201 31697-29 e-mail: [email protected] • http://www.schwarzer.com Subject to change without notice. Given values are for preliminary information only and not legally binding. 24.04.2014

Open the catalog to page 1

SP100 EC - Eccentric Diaphragm Pumps for Gas / Air-2

Eccentric Diaphragm Pumps for Gas / Air SP 100 EC The pumps listed below represent a typical selection of our wide range of eccentric pumps and are intended for initial tests. Customised versions for your individual application would be made without extra costs - please contact us! Operating Voltage* Art.No. Pneumatic Performance Free Flow [ml/min] flow at: 100 mbar [ml/min] max. Pressure [mbar] flow at: -100 mbar [ml/min] max. Vacuum [mbar] Motor / Power Consumption Motor Type skew wound standard optional max. Current [mA] double ball bearings / brushless 70 Construction Pump Head standard optional...

Open the catalog to page 2

SP100 EC - Eccentric Diaphragm Pumps for Gas / Air-3

Eccentric Diaphragm Pumps for Gas / Air SP 100 EC The pumps listed below represent a typical selection of our wide range of eccentric pumps and are intended for initial tests. Customised versions for your individual application would be made without extra costs - please contact us! Operating Voltage* Art.No. Pneumatic Performance Free Flow [ml/min] flow at: 100 mbar [ml/min] max. Pressure [mbar] flow at: -100 mbar [ml/min] max. Vacuum [mbar] Motor / Power Consumption Motor Type iron core - standard optional max. Current [mA] Construction Pump Head standard optional PPS customer specific - upon...

Open the catalog to page 3

SP100 EC - Eccentric Diaphragm Pumps for Gas / Air-4

Eccentric Diaphragm Pumps for Gas / Air Mounting clamp (plastic) Standard: connection ports as shown. Optional: 3 other port positions possible (see dashed lines) In order to reduce noise and vibration we recommend securing the pump in one of the following ways: • with padded double sided adhesive tape • with Velcro (hook and loop) tape for easy assembly and service • Put the pump in a box lined with foam. Wires for the motor and tubing for the pump can go through a hole in the side of the box. Am Lichtbogen 7 • 45141 Essen • Germany Phone: +49 201 31697-0 • Fax: +49 201 31697-29 e-mail: [email protected]...

Open the catalog to page 4