Form Drilling Substantial cost savings due to insertable form drills.

Form drilling with insertable form tools for significant cost reductions! Plunge-cutting with Schwanog instead of single-point turning has proven itself in countless applications with unit cost reductions of 40 % and more. With its insertable form drilling system, Schwanog is offering an equally efficient and cost-saving solution, due to the fact that only the insertable carbide tool is ground and not the entire solid carbide drill. With the insertable form drill which is individually ground according to a customer drawing a minimum tolerance of ± 0.02 mm can be achieved. To complement the PWP-...

Application examples Bereich X-X=30°/ 40° in eine Richtung frei X-X= 10° / 20° in eine Richtung frei Machining of a highly complex trumpet mouthpiece profile from non-ferrous metal and wood. Manufacturing of a spherical contour with highest accuracy. Area X-X = 12° / 35° Side clearance Typical face groove, form drill with twofold cutting edges, designed for increased feed rate. Technical Facts: Drilling, facing and finishing of external chamfer in one operation. Insertable inserts up to 28 mm in width Part cost reduction by up to 40 % For bore diameter up to 28 mm and bore depth up to 13 mm Elimination...

Insertable tooling systems. ID Whirling (Thread mills) Thread milling Polygon turning Form drilling Shave tools Rotary transfer machines Selector system Schwanog LLC 1630 Todd Farm Drive · Elgin, IL 60123 Phone: 847- 289 -10 55 · Fax: 847- 289 -10 56 www.schwanog.com · [email protected] Schwanog Sàrl 89 Allée des Nénuphars · F - 74300 Thyez Téléphone 0450 18 65 16 · Fax 0450 18 47 75 www.schwanog.com · [email protected] Schwanog · Siegfried Güntert GmbH Shanghai Representative Office · Room 757 B Tower 3, German Centre · 88 Ke Yuan Road · Shanghai Phone: +86 -21- 28 98 - 62 10 · Fax:...