Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Schuster Maschinenbau GmbH
  3. V-Series
video corpo

V-Series

V-Series
1 / 6 PagesView full catalog

V-Series

Product catalog summary
Overview: The document describes the V-Series modular double/multi-spindle turning cell designed for fast, compact, and productive machining of symmetric components. It highlights the system's capabilities in both soft and hard machining, emphasizing its compact design and high-speed handling system.
Key Features:
  • Compact Design: The V-Series features a compact design with a mineral cast machine column, allowing for efficient use of floor space and quick part transfer.
  • High-Speed Handling: The system includes a high-speed handling unit for loading, unloading, and component transport, enabling complete machining of components up to 200 mm in diameter.
  • Modular Configuration: The modular bed design allows for easy extension to optimize volume or process changes.
Technical Specifications:
  • Working Space: The system accommodates components with a maximum diameter of 200 mm.
  • Spindle and Turret: Options include single, double, or triple spindle configurations with VDI 40 turret control.
  • Control System: Operated by Siemens 840 D sl control system.
  • Dimensions: Vary based on configuration, with lengths ranging from 1800 mm to 4450 mm.
Productivity Enhancements:
  • VD 20 Double Spindle: Designed for twin machining operations, allowing for identical or two-sided machining with high-speed handling.
  • VD 20 Trio: Incorporates a third module for additional operations, balancing cycle times and optimizing workflow.
Additional Operations: The system supports additional operations such as deburring, measuring, brushing, and marking, enhancing overall productivity.
Contact Information: Schuster Maschinenbau GmbH, Wernher-von-Braun-Straße 7, 86920 Denklingen, Phone: +49 8243 9680-0, Email: [email protected]
See more

Catalog excerpts

V-Series-1

Fast. Compact. Productive. Vertical turning Modular double- /multi spindle turning cell with fast handling system for soft and hard machining

 Open the catalog to page 1
V-Series-2

A characteristic feature of the V-Series is the loading and unloading as well as the component transport through a high-speed handling unit for the complete machining of symmetric components up to a diameter of 200 mm. Based on our thermally stable mine-ralit cast machine column, the Z axis movement as well as the optionally available Y axis is carried out by the motor spindle. The X axis is controlled by movement oft he VDI 40 turret. Because of the modular designed bed (900 mm), part machining is carried out utilizing a minimal floor space and extremely quick part transfer. This proven system...

 Open the catalog to page 2
V-Series-3

V-Series – Highspeed Double spindle turning cell VD 20 with handling system The double spindle turning cell VD 20 is typically used for twin machining of the same operation (OP10/OP10). Components up to a diameter of maximum 200 mm can be centrally loaded and unloaded between the two spindles, utilizing the high speed handling unit. In this configuration the identical machining will be executed by the independent spindles. As an option, the VD20 is available for two sided machining operations (OP10/OP20). In this setup, the maximum diameter of the components is 150 mm. The loading and unloading...

 Open the catalog to page 3
V-Series-4

V-Series – Productivity Triple turning cell V20 trio The VD 20 trio will be used for twosided complete machining with very different cycle times of the sides 1 and 2 or for the machining of difficult additional operations. Due to the very quick and simple handling of the components, time intensive operations can be divided up by using the third module. This creates a balanced cycle time. Additional operations, that can´t be placed in a classical double spindle machine, can easily be done in the third turning cell. This saves money, reduces the floor space needed and optimizes the workflow. The...

 Open the catalog to page 4
V-Series-6

Our product range Vertical Turning Impact cutting F-Series: Flexible turning cells Custom machines Transfer lines P-Series: Pick Up lathes V-Series: Vertical turning cells Engineering with passion Schuster Maschinenbau GmbH Wernher-von-Braun-Straße 7 86920 Denklingen [email protected] www.schuster-maschinenbau.de

 Open the catalog to page 6

All Schuster Maschinenbau GmbH catalogs and technical brochures

  1. 7G Impulser
    7G Impulser

    18  Pages

  2. P-Series
    P-Series

    7  Pages

  3. F-Series
    F-Series

    16  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.