Catalogs >
SCHURTER >
Power Entry Modules with Line Filter 5123

Power Entry Modules with Line Filter 5123
1 / 10Pages

Catalog excerpts

Power Entry Modules with Line Filter 5123 - 1

Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 or C18 with Filter, high attenuation, ECO design, Front- or Rear Side Mounting Screw-on mounting Snap-in mounting Screw-on mounting Quick connect terminals 6.3 x 0.8 mm with wires (stranded) See below: Approvals and Compliances Description - Panel mount : Screw-on version from front or rear side, snap-in version from front side, PCB Version from rear side - 2 Functions : Appliance Inlet protection class I or II , Line filter in standard and medical version - Solder, quick connect or wire (stranded) - PCB Mounting - Earth Terminal Unique Selling Proposition - Very high asymmetrical attenuation - V-Lock cord retaining - Metal flange for optimal shielding - Compact design Characteristics - Compact filter with high asymmetrical attenuation Optimal shielding due to completely closed filter case, unpotted - Suitable for assembly in metal plated plastic housings - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Snap-in for panel thickness >2mm to 3mm - flexible wire with various lenghts - Class X1- and Y1-capacitors for enhanced withstand voltage - Variant with plastic flange for front mounting Weblinks pdf data sheet, html data sheet, General Product Information, Distributor-Stock-Check, Accessories, Detailed request for product, Microsite, Landing Page Technical Data Ratings IEC1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz Ratings UL/CSA1 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz Leakage Current standard < 0.5 mA (250 V / 60 Hz) _medical < 5 pA (250 V / 60 Hz) Dielectric Strength > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) Allowable Operation Tempe- -25 °C to 85 °C rature Climatic Category25/085/21 acc. to IEC 60068-1 IP-Protectionfrom front side IP40 acc. to IEC 60529 Protection Class Suitable for appliances with protection class I or II acc. to IEC 61140 Terminal Quick connect terminals 6.3 x 0.8 mm Solder terminals Flexible wire AWG18 (15A AWG16), 150 mm Panel Thickness S Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 2 mm (all steps with one variant) Material: Housing Themoplast / steel tin-plated, black / UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Line Filter Standard and Medical Version, IEC Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. ELECTRONIC COMPONENTS

Open the catalog to page 1

Power Entry Modules with Line Filter 5123 - 2

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5123 Approval Logo cTOus Certificates VDE Approvals UL Approvals Certification Body Description UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Designed according to Designed according to |J5J| Designed according to Designed according to Designed according to Designed according to Designed...

Open the catalog to page 2

Power Entry Modules with Line Filter 5123 - 3

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimensions [mm] Front or rear side mounting for screws with nuts or blind rivets (panel cutout for frontside mounting) Rear side mounting with pre-formed, threaded holes for M3 screws (panel cutout for rear side mounting) Dimensions for class II version also apply to class I Snap-in mounting from front side Dimensions for class I version also apply class II

Open the catalog to page 3

Power Entry Modules with Line Filter 5123 - 4

Power Entry Modules with Line Filter https://www.schurter.com /PG06 PCB snap-in rear side mounting, protection class II 48.6 PCB rear side mounting, protection class II 48.6 40

Open the catalog to page 4

Power Entry Modules with Line Filter 5123 - 5

Screw and snap-in mounting with flexible wire 5) 1) Flexible wire, standard length 150 mm or special length on request 2) Nonexistent for protection class II 3) Panel cut-out screw-on version, back-side mounting 4) Panel cut-out screw-on version, front- or back-side mounting 5) Panel cut-out snap-in version, front-side mounting Technical Data of Filter-Components Rated Current Filter-Type [A] 1 Standard Version Inductances Capacitance Capacitance R [MQ] I H.SCHURTER ELECTRONIC COMPONENTS

Open the catalog to page 5

Power Entry Modules with Line Filter 5123 - 6

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams Standard version Bleed resistor version / medical version M80 Medical version M5, protection class II Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version

Open the catalog to page 6

Power Entry Modules with Line Filter 5123 - 7

Power Entry Modules with Line Filter https://www.schurter.com /PG06 All Variants Rated Cur- Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number 1 Standard Version Snap-in Front Side Quick connect I • 5123.2000.0 H.SCHURTER 7 ELECTRONIC COMPONENTS

Open the catalog to page 7

Power Entry Modules with Line Filter 5123 - 9

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Availability for all products can be searched real-time: https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER - 15 A version only according UL/CSA - Type for screw-on mounting from rear side has pre-threaded holes for M3 screws I H.SCHURTER ELECTRONIC COMPONENTS

Open the catalog to page 9

Power Entry Modules with Line Filter 5123 - 10

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Category / Description Appliance Outlet Overview complete Connector further types to 5123 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS Power Cord further types to 5123 ELECTRONIC COMPONENTS The specifications, descriptions and illustrations indicated in this document are based on current information. All...

Open the catalog to page 10