Connectors (Inlets/Outlets) www.schurter.com/PG07 IEC Appliance Outlet F, Snap-in Mounting, Front Side, IDC Terminal Arrangement "cross" (wires cross to pin axis) Arrangement "along" (wires along to pin axis) Arrangement "along", view from rear side (wires along to pin axis) - Panel Mount: Snap-in version, from front side - Connector, Pin temperature 70 °C, Protection class I - Wire gauge 1-1.5mm²/1.5mm²/2.5mm²/14AWG/12AWG - IDC terminals acc. to IEC 60998-2-3 for solid wires - IDC technology for efficient and cost saving mounting Protection cover can be used as "wire press" - Live contact available as IDC, solder or quick connect terminal - Suitable for use in equipment according to IEC 60950 Other versions on request - UL approval for AWG 16; Versions for other wire gauges - Protection class II, 70°C - ENEC File Number: 40035679 - UL File Number: E103791 - CCC File Number: 2010010204418560 pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, CADDrawings, Accessories, Mounting instruction, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Allowable Operation Temp. Degree of Protection Protection Class 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 IDC terminals Snap-in,0.8/1/1.2/1.5/2/2.5/3.0 mm (other on request) Thermoplastic, black, UL 94V-0 Terminal Panel Thickness s Material: Housing Dimensions Version "cross" (wires cross to pin axis) L/N/PE: IDC terminals Appliance Outlet F acc. to IEC 60320 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I Version "along" (wires along to pin axis) L/N/PE: IDC terminals

Version "cross" (wires cross to pin axis) N/PE: IDC terminals, L: quick connect or solder terminal Version "along" (wires along to pin axis) N/PE: IDC terminals, L: quick connect or solder terminal +0.20 0 1) Other options: Quick connect terminal 4.8x0.8: Solder terminal: Mounting instructions Mounting tool version "cross" - The above mentioned dimensions are recommended when using an assembly tool. - When using an assembly tool we recommend the above-mentioned dimensions. - Use the cover or an assembly tool, to push the wires into the IDC terminals. - The assembly force depends on the wire used...

Conductor cross section Terminal type live contact Order Number Quick connect terminal 6.3 x 0.8 Quick connect terminal 6.3 x 0.8 Articles for 1-1.5mm² only with ENEC approval. Outer diameter of wire (including insulation) max. 3.5 / 3.6 mm. 1) The alignment describes whether the wires are along or across to the connector pin axis. Suffix ".03" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Accessories Description Cord retaining...