Catalogs >
SCHURTER >
MSM DP 30

MSM DP 30
1 / 8Pages

Catalog excerpts

Metal Line Switches Momentary action switch double pole Approvals and Compliances Description - Available in version Standard, lettered, with Point Illumination or Ring Illumination - Assembly method: clip micro-switch into the saddle, secure switch using mounting nut - Equipped with flat-pin plugs to permit fast connection - Housing and actuating area material: high-quality stainless steel for use in harsh environments (see technical data) - Variety of design options regarding size, colour, illumination, connection or lettering - Switching voltage from 30 VDC to 250 VAC, switching current from 0.1 A to 10 A - optional with point or ring illumination - double pole version with two switching contact sets, can be wired as NO, NC or as change-over - IP-Protection: IP67 from front side to contact area, Micro-Switch is available in versions IP40 or IP67 Alternative: Standard version MSM 16; MSM 30 Alternative: switch with latching function: MSM LA 19 Alternative: switch with backlighted illumination: MSM CS 19; MSM CS 22 Alternative: Other diameter MSM DP 19; MSM DP 22 html data sheet, General Product Information, CAD-Drawings, Product News, Detailed request for p

Open the catalog to page 1

Metal Line Switches Technical Data Electrical Data Switching Function Number of Poles Supply Voltage N.O., N.C., N.O./N.C. 2-pole 24 / 12 / 5 VDC Ring Illumination , Point Illumination without series resistor , LED operating data are listed in separate table 5 VDC and 12 VDC variants on request (MOQ 500 pieces) 4 kV MSM ST / MSM LE Impulse Withstand Voltage (ESD) Micro Switch 5 A / 125 VAC or 3 A / 250 VAC, IP40 Contact Material Ag Switching Voltage max. 125 / 250 VAC Switching Current max. 5 / 3 A Rated Switching Capacity 750 W Lifetime 0.2 million actuations at Rated Switching...

Open the catalog to page 2

Metal Line Switcheshttps://www.schurter.com /PG70Approvals Approval Reference Type: Approval Logo Certification Body VDE Description Low Voltage Directive 2014/35/EU Low Voltage Directive 2014/35/EU VDE / ENEC Certificate Number (Omron): 40008425, 129246, 125256 UL / CSA File Number (Omron): E41515 VDE / ENEC Certificate Number (Marquardt): 097550 UL / CSA File Number (Marquardt): E41791 KEMA / ENEC File Number (Cherry): 2089323.01 UL / CSA File Number (Cherry): E23301 Product standards Product standards that are referenced Organization Design Description Switches for appliances. Part...

Open the catalog to page 3

Metal Line Switches Legend A = Illumination Area B = Actuating Area C = Width Across Flats D = Nut Tolerance Range Actuator Tolerance Range The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. Drilling diagram Drilling diagram

Open the catalog to page 4

Metal Line Switches Assembly Instructions I Housing II Flat Pin Terminal (Illumination) III Gasket IV Nut (Nut type see Dimensions) V Module Switching Contact Installation Instruction: 1.) Place the gasket accurately on the actuator housing. Then mount the actuator housing assembly into the panel. 2.) Tighten the screw nut according to the torque instructions. 3.) Clasp the module switching contact into the actuator housing. Installation information: 1.) The power supply and the configuration of the flat pin terminals have to be installed correctly for the illumination and micro switch...

Open the catalog to page 5

Metal Line Switcheshttps://www.schurter.com /PG70 Point Illumination ELECTRONIC COMPONENTS

Open the catalog to page 6

Metal Line Switches All Variants IP Switching Unit Switching Current Switching Voltage Housing Material, Torsion Protection Actuator Material, Torsion Protection Stainless Steel ,no Config. Code Order Number Stainless Steel ,no Stainless Steel ,yes Stainless Steel ,yes Stainless Steel ,yes Stainless Steel ,yes Point Illumination, green Stainless Steel ,yes Stainless Steel ,yes Point Illumination, blue Stainless Steel ,yes Stainless Steel ,yes Stainless Steel ,yes Stainless Steel ,yes Ring Illumination, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes Ring Illumination, blue, 24 VDC...

Open the catalog to page 7

Metal Line Switches Accessories Description Power Supply Power Supply IP42 for LED- and Illumination applications indoor 90~264 VAC => 24 VDC 0.34 A 8 W The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

Open the catalog to page 8