Power entry modules without line filter www.schurter.com/PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole Snap-In Version - Panel Mount: Snap-in version from front side - 2 Functions: Appliance Inlet protection class I or II, Fuseholder for fuse-links 5 x 20 mm on the rear-side 1‑ or 2‑pole - VDE Certificate Number: 40024857 - UL File Number: E93617, E96454 - CSA File Number: 38456 - CCC File Number: 2006010204183182 - Two "locking" snappers reinforce connector against repeated or excessive pull out force during plug removal - All single elements are already wired - Fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Ground terminal, solder/quick-connect, 90° to connector axis pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, CADDrawings, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 125 VAC; 60 Hz > 2.2 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm , Ground terminal: Solder terminals or quick connect terminals tin-plated Solder terminal on request Snap-in: 1/1.2/1.5/2/2.5/3 mm (other on request) (all steps with one variant) Thermoplastic, black, UL 94V-0 Appliance Inlet Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C C14 / C18 acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves

Power entry modules without line filter punched / drilled Line and neutral: Quick-connect Ground terminal: Quick connect Ground terminal: Quick-connect Quick connect terminal 4.8 x 0.8 Quick connect terminal 4.8 x 0.8 Quick connect terminal 6.3 x 0.8 Assembly Instructions 1) Main snappers for snap-in mounting 3) Additional safety snappers in use 2) Additional safety snappers not in use against excessive pull out force

Power entry modules without line filter www.schurter.com/PG05 Admissible power acceptance in Watt per pole Admissible Power Acceptance in Watt All Variants Protection Class Ground terminal Order Number Quick connect terminals 4.8 x 0.8 mm Quick connect terminals 4.8 x 0.8 mm Quick connect terminals 4.8 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 4.8 x 0.8 mm Quick connect terminals 4.8 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/StockCheck-SCHURTER Suffix...

Power entry modules without line filter Category / Description Power Cord Overview complete Power Supply Cord with IEC plug C14, stripped end 6007.0204 Power Cord further types to GSF2 Power Supply Cord Overview complete Power Supply Cord with IEC Connector C13 straight, stripped end 6000.0214 Power Supply Cord with IEC Connector C13 angled, stripped end 6000.0224 EU Power Supply Cord with IEC Connector C13, straight 6003.0215 EU Power Supply Cord with IEC Connector C13, straight 6004.0215 US Power Supply Cord with IEC Connector C13, straight 6009.1315 Power Supply Cord further types to GSF2...