FMBB RAIL 1-Phase Line Filters www.schurter.com/PG84 AC Filter 2-Stage, DIN Rail Mounting, Very Broad Band Attenuation - Chassis: DIN rail mounting - Line filter in standard or industrial version, 2 positions, very high attenuation, broadband - High symmetrical and asymmetrical attenuation in the frequency range from 10kHz up to 30MHz - Protection against interference voltage from the mains Possible interferences generated in the equipment are strongly attenuated - Especially designed for electric switch and control cabinets - Suitable for use in equipment according to IEC/UL 60950 pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Material: Housing 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 °C / 125/250 VAC; 60 Hz standard < 0.25 mA (250 V / 50 Hz) 1.7 kVDC between L-N 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 IP 20 IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Bolts and nuts M4, Quick connect terminal for PE Metal Line Filter Standard and Industrial Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 200'000 h acc. to MIL-HB-217 F

FMBB RAIL 3) Tightening torque 0.6-0.8 Nm, Screw 4mm2 4) Quick connect terminal 6.3x0.8mm ELECTRONIC COMPONENTS ^^^^^^^^^^^m

FMBB RAIL Attenuation Loss Standard version common mode Industrial version Standard Version Standard Version Standard Version Standard Version Industrial Version Standard Version Industrial Version Standard Version Screw clamps Order Number Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) Leakage current acc. IEC60950 - 5.2.3 - Annex D (situation when neutral is interrupted) 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm2 values can be found in the general product information...