FMAB RAIL 1-Phase Line Filters www.schurter.com/PG84 AC Filter, DIN Rail Mounting - Chassis: DIN rail mounting - Line filter in industrial version, 1 stage, high attenuation - Especially effective against asymmetrical interferences in the frequency range from 100kHz up to 30MHz - Protection against interference voltage from the mains Possible interferences generated in the equipment are strongly attenuated - Especially designed for electric switch and control cabinets - Suitable for use in equipment according to IEC/UL 60950 pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Material: Housing 10 - 20 A @ Ta 40 °C / 250 VAC; 50 Hz 10 - 20 A @ Ta 40 °C / 125/250 VAC; 60 Hz industrial < 2.1 mA (250 V / 50 Hz) 1.7 kVDC between L-N 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 IP 20 IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Bolts and nuts M4, Quick connect terminal for PE Metal Line Filter Industrial Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 200'000 h acc. to MIL-HB-217 F

FMAB RAIL 1) Line 2) Load 3) Tightening torque 0.6-0.8 Nm, Screw 4mm² 4) Quick connect terminal 6.3x0.8mm Attenuation Loss Industrial version - - - - differential mode _____ common mode

FMAB RAIL Weight Screw clamps Order Number Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) Leakage current acc. IEC60950 - 5.2.3 - Annex D (situation when neutral is interrupted) 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm2 values can be found in the general product information www.schurter.com/emc_info The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information...