Catalogs >
SCHURTER >
Felcom 64

Felcom 64
4Pages

Catalog excerpts

Power entry modules without line filter www.schurter.com/PG05 IEC Appliance Inlet C14 with modular extended Components 6421.005X.XX Appliance inlet Appliance outlet Plug removal necessary for fuse replacement 6431.005X.XX Appliance inlet Switch Appliance outlet 6432.0X5X.XX Appliance inlet Fuseholder Switch Appliance outlet - Panel Mount: Snap-in version, from front side - 2 - 5 Functions: Appliance Inlet, Protection class I, Outlet, Line Switch 2-pole, Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole, Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm - VDE Certificate Number: 40028094 - ENEC File Number: 101307 - UL File Number: E103791, E96454 - CSA File Number: 38456 - Modular component selection - Individual components soldered on a printed circuit board - Plug removal necessary for fuse-link replacement Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuseholder is accessible from the equipment front - Fully insulated from the rear - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Line switch with other rocker marking Alternative: version with line filter Felcom 54 pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, CADDrawings, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Allowable Operation Temp. Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 125/250 VAC; 60 Hz -25 °C to 70 °C Suitable for appliances with protection class I acc. to IEC 61140 Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm , tinplated Snap-in: 1/1.2/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance Inlet / Appliance Outlet Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch C14 acc. to IEC 60320 and F acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, IEC 61058-1 Technical Details

Open the catalog to page 1

Power entry modules without line filter www.schurter.com/PG05 Variants 6421.005X.XX Mounting hole: 53.6+0,2 x 27.6+0,2 Variants 6422.005X.XX Mounting hole: 46.7+0,2 x 27.6+0,2 Variants 6424.0X5X.XX Mounting hole: 57+0,2 x 27.6+0,2 Variants 6423.0X5X.XX Mounting hole: 65.5+0,2 x 27.6+0,2 Variants 6432.0X5X.XX Mounting hole: 90.6+0,2 x 27.6+0,2 Variants 6431.005X.XX Mounting hole: 80.1+0,2 x 27.6+0,2

Open the catalog to page 2

Power entry modules without line filter Ordering instructions "Snap-in" panel thickness 53 = quick connect terminals 6,3 x 0,8 mm Module combination 21 = Appliance inlet, outlet 22 = Appliance inlet, switch 23 = Appliance inlet, fuseholder, outlet 24 = Appliance inlet, fuseholder, switch 31 - Appliance inlet, outlet, switch 32 = Appliance inlet, fuseholder, outlet, switch Base model

Open the catalog to page 3

Power entry modules without line filter Cord retaining kits Cord retaining strain relief Mating Inlets/Plugs Category / Description Plug Overview complete IEC Plug E, Cord Connector (Rewireable), IEC Plug E, Cord Connector (Rewireable), IEC Plug E, Cord Connector (Rewireable), IEC Plug E, Cord Connector (Rewireable), IEC Plug E, Cord Connector (Rewireable), Plug further types to Felcom 64 Straight, max. cable Diameter 8.5 mm Angled, max. Cable Diameter 8.5 mm Straight, max. Cable Diameter 10 mm Angled, max. Cable Diameter 10 mm Mating Outlets/Connectors Appliance Outlet Overview complete...

Open the catalog to page 4