Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C20 with Circuit Breaker TA45 Screw-on version from front or rear side Rocker non-illuminated white Snap-in mounting from front side Rocker illuminated orange - Panel mount : Screw-on version from front or rear side, snap-in version from front side - 2 Functions : Appliance Inlet Protection class I , circuit breaker type TA45 2-pole - Quick connect terminals 6.3 x 0.8 mm - All single elements are already wired - Unwired versions available on request - Circuit Breaker non-illuminated or illuminated - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Unwired versions - Variant with notch for V-Lock mating Cordsets Alternative: version with line filter EF12 pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Landing Page Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing 16 A / 250 VAC; 50 Hz 20 A / 250 VAC; 60 Hz > 1.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -10 °C to 55 °C from front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 appliance inlet/-outlet Circuit Breakers C20 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I Acc. IEC/EN 60934, UL 1077, CSA 22.2 no. 235 2-pole rocker switch, illuminated or nonilluminated. Optional with undervoltageor remote trip release Short circuit capacity Icn: at In < 3A/240VAC : 10 x In at In ≥ 3A/240VAC : 300A Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual

Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: EF11 Approval Logo cTOus Certificates VDE Approvals UL Approvals Certification Body Description Product standards Product standards that are referenced Design Designed according to Designed according to Designed according to Standard Description IEC 60320-1 Appliance couplers for household and similar general purposes UL 60320-1 Standard for Attachment Plugs...

Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting ** --- Version TA45 with undervoltage relaese Snap-in mounting **--- Version TA45 with undervoltage release

Power entry modules without line filter https://www.schurter.com /PG05 Effect of ambient temperature The units are calibrated for an ambient temperature of +23°C. To determine the rated current for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Example: Rated current = 5 A, Environmental temperature = 40 °C, --> Correction factor = 1.08, Resulting current = 5.5 A --> Fount to next higher rated current: 6 A Time-Current-Curves Tripping Characteristics In < 3 A Tripping Characteristics In > 3. . . < 18 A Type/Typ Rated current Ambient temp....

Power entry modules without line filter https://www.schurter.com /PG05 Tripping Characteristics In > 18 A H.SCHURTER 5 ELECTRONIC COMPONENTS

Power entry modules without line filter https://www.schurter.com /PG05 • Circuit Breaker of Equipment • 2-pole, rocker actuated • Quick connect terminal Other types on request Configuration code TA45 Type Configuration code TA45 EF11-A B T W F 1 5 0 C 0 - 000-111-000Without release: code C0Undervoltage release Remote trip release Rated Code voltage Un 240 V AC 230 V AC 120 V AC Rated current circuit breaker of equipment Other rated currents on request Position of the rocker legend e.g F Rocker legend Surface F embossed H printed K printed L printed M printed P printed R printed Colour of print...

Power entry modules without line filter https://www.schurter.com /PG05 Configuration code (Order example) Type Configuration code TA45 EF11-A B T W F 1 5 0 C 0 - Optional Variants 0 standard 9 V-Lock notch Colour 0 black Mounting 0 Screw mounting 2 Snap-in mounting s = 1.5 3 Snap-in mounting s = 2.0 4 Snap-in mounting s = 2.5 Terminal PE 1 Quick-connect terminals 6.3x0.8mm Terminal N 1 Quick-connect terminals 6.3x0.8mm, without connection to TA45 3 connection to TA45 non insulated Terminal L 1 Quick-connect terminals 6.3x0.8mm, without connection to TA45 3 connection to TA45 non insulated ELECTRONIC...

Power entry modules without line filter https://www.schurter.com /PG05 Mating Outlets/Connectors Category / Description Connector Overview complete Power Supply Cord further types to EF11 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC19KS, Overview, V-Lock cord retaining, diverse Connector IEC C19, diverse, black VAC19KS Power Cord further types to EF11 Connectors ELECTRONIC COMPONENTS The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished...