Power entry modules without line filter https://www.schurter.com /PG05 Screw-on with IP67 and TA35 in white with black Screw-on with IP67 Snap-in IP40 with TA35 red illuminated and em- printed symbols bossed symbols See below: Approvals and Compliances Description - Panel mount : Screw-on version from front or rear side, snap-in version from front side - 2 Functions : Appliance Inlet , protection class I or II , Circuit breaker type TA35 , 2-pole - Pre-wired coupling - V-Lock notch standard - Quick connect terminal 6.3 x 0.8 mm Unique Selling Proposition - Variant tested for IP67 into the appliance - Various mounting options - Recessed rocker prevents accidental manipulation - Compatible with V-Lock cord retention Characteristics - Connector and circuit breaker are prewired - Circuit Breaker non-illuminated or illuminated - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Version without pre-wiring from inlet to circuit breaker - Protection class II, 70°C - Variants in white References Substitute for type 6135 Component: circuit breakers TA35 Rocker 2Pole Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor-Stock-Check, Accessories, Detailed request for product, Landing Page Technical Data Ratings IEC 10 A/250 VAC; 50 Hz Ratings UL/CSA15 A/250 VAC; 60 Hz Dielectric Strength > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- -25 °C to 60 °C rature IP-Protection from front side IP40 or IP67 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I or II acc. to IEC 61140 TerminalQuick connect terminals 6.3 x 0.8 mm Panel Thickness S Screw: max 8 mm Recommended torque min 0.25 Nm Snap-in : S =1/1.2/1.5/2/2.5/3 mm Material: HousingThermoplastic, black, UL 94V-0 UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA 22.2 no. 235 2-pole rocker switch, illuminated or non-illuminated. Conditional short circuit Inc: 2000 A Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DG11 Certificates VDE Approvals UL Approvals CQC Approvals Certification Body Description UL UL File Number: E96454 CQC CCC Certificate Number: pending ELECTRONIC COMPONENTS

Power entry modules without line filter https://www.schurter.com /PG05 Product standards Product standards that are referenced Design Designed according to Designed according to Designed according to Standard Description IEC 60320-1 Appliance couplers for household and similar general purposes UL 60320-1 Standard for Attachment Plugs and Receptacles CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Designed for applications acc....

Power entry modules without line filter https://www.schurter.com /PG05 Screw-on mounting version A for front mount IP40 5.65 Screw-on mounting Version A for rear mount IP40 (51.6) Screw-on mounting Version B for front mount IP40

Power entry modules without line filter https://www.schurter.com /PG05 Screw-on mounting version B for rear mount IP40 Screw-on mounting for front mount IP67 Example: Rated current = 5 A, Environmental temperature = 50 °C --> Correction factor = 1.04, Resulting current = 5.2 A --> Fount to next higher rated current: 6 A ELECTRONIC COMPONENTS

Power entry modules without line filter https://www.schurter.com /PG05 Multiple of Rated Current In Reference Temperature +23° Multiple of Rated Current In Reference Temperature +23°

Power entry modules without line filter https://www.schurter.com /PG05 ORDER CODE Number of switched poles Number of protected poles Table 1 Selection for type TA35 Order example Switch without illumination Switch illuminated 240 V 120 V Colours Switch front Rocker non-illuminated illuminated - red transparent - green transparent - orange transparent Other colours on request Colour of print white black white black Rocker legend Surface Illustration F embossed - ° Other legends on request Position of the rocker legend e.g. I / O Other rated currents on request *) UL / CSA...

Power entry modules without line filter https://www.schurter.com /PG05 Please note that Schurter will establish an internal part number for logistics use in addition to the order code. The format of this internal part number is, for example: 3-XXX-XXX 00 Screw version A front mounting 01 Screw version B front mounting 02 Screw version A rear mounting 03 Screw version B rear mounting 88 Screw version front mounting (sealed towards housing, IP67) All Variants Config. Code Availability for all products can be searched real-time: https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER...