Power entry modules without line filter www.schurter.com/PG05 IEC Appliance Inlet C14 with Line Switch 1- or 2-pole - Panel Mount: Screw-on version from front or rear side, snap-in version from front side - 2 Functions: Appliance Inlet protection class I or II, Line Switch 1‑ or 2‑pole - Quick connect terminals 4.8 x 0.8 mm - Ultra-compact design - All single elements are already wired Unwired versions available on request - Line switch non-illuminated or illuminated High inrush current up to 100A - Ideal for application with high transient loads - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Unwired versions - Solder terminals - Line switch with other rocker marking Alternative: version with line filter DC12 Substitute for type KEB1; KEB2; 6010-K pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, CADDrawings, Accessories, Wire Harnessing, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 50/60 Hz ¹⁾ > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch C14 acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Rocker switch 1 or 2 pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical Details Standard version 12 A / special version 15A

Power entry modules without line filter www.schurter.com/PG05 Dimensions Screw-on mounting 27.3

Power entry modules without line filter www.schurter.com/PG05 Diagrams Line switch non-illuminated 2-pole Line switch illuminated 2-pole Line switch non-illuminated 1-pole All Variants Rated Current UL [A] Protection Class Panel mounting Line Switch █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER With screw mounting on PCB, 2 screws are included All variants according VDE (ENEC 10) approved for 10 A Suffix ".21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended...

Power entry modules without line filter Assorted Covers Rear Cover Wire Harness Wire harness for SCHURTER products Cord retaining kits Cord retaining strain relief Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal Appliance Outlet further types to DC11 Connector Overview complete IEC Connector C15A, Rewireable,...

Power entry modules without line filter Mating Outlets/Connectors shuttered Power Cord Overview complete Overview Power Supply Cord with IEC Connector C13, V-Lock, straight Power Cord further types to DC11 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed ConnGCtOfS [5] 5CHURTER I 5 to be accurate and reliable. However, users should independently evaluate the suitability and test each tl___________ ' ' ELECTRONIC COMPONENTS product selected for...