CPS CPS Ring illumination green CPS Ring illumination blue See below: Approvals and Compliances Description - Capacitive touch sensor as momentary push button (NO or NC) or as latching switch (LA) - Protection against unintended switching - Multicolor illumination - Floating switch connections - Laser lettering possible - Vandal resistant - Wires (8 wires for Multicolor, 4 wires otherwise)2; 26AWG, 0.128 mm2 Unique Selling Proposition - Variable supply voltage - Constant LED intensity - Inputs protected against overvoltage - Galvanic separated outputs Characteristics - Housing made from stainless steel - Various illumination colors and color combinations possible - Touch surface made from scratch-resistant ceramics with area illumination or made from stainless steel with ring illumination - Ring or area illumination - Wearless, no moving parts - Attractive design with or without finger guide available Weblinks pdf data sheet, html datasheet, General Product Information, CAD-Drawings, Product News, Detailed request for product, Microsite Important information - The CPS is not suitable for use in sanitary or other applications exposed to water or other liquids. - The housing is connected to gnd. Electrical Data Switching Functionmomentary (NO1) or latching Switching Voltagemax. 42 VAC / 60 VDC Switching Currentmax. 100 mA Electrical Rating1 W Switch Resistance OFF> 10 MQ Switch Resistance ON< 16 Q Supply Voltage5 - 28 VDC Current Consumption all LEDs 2.5 mA (switch is open) off _ 8.5 mA (switch is closed) Current Consumption 1 LED 8.0 mA (switch is open) on _ 14.0 mA (switch is closed) Current Consumption 2 LED 14.0 mA (switch is open) on _ 20.0 mA (switch is closed) Current Consumption 3 LED 19.0 mA (switch is open) on _ 25.0 mA (switch is closed) Reverse Polarity Protection yes Short Circuit Protectionyes Output TypeOptoMOS Relay Lifetime5 million actuations connection type Wires (8 wires for Multicolor, 4 wires Mechanical Data Actuation Typecapacitive Actuating Forcenone Shock ProtectionIK 09 Mounting Depth with Finger Guide: 30.3 mm_ _without Finger Guide: 30 mm Tightening Torque Plastic Nut 2.5 Nm Climatical Data Operating Temperature-40 to 60 °C Storage Temperature-40 to 85 °C IP Protection Class Front Side IP67 acc. to IEC 60529 Salt Spray Test (acc. to DIN 24 h / 48 h / 96 h Residence Time 50021-SS) Material HousingsStainless Steel Actuator Area Illumination: Ceramics_ _Ring Illumination: Stainless steel Illuminated Ring (Ring Illumi- PMMA i on request also available as NC / 2 on request also available with cable or connector ELECTRONIC COMPONENTS

Metal Line Switches Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual...

Metal Line Switches For all other configurations Connection wire assignment Connection wire assignment * internal pull-up resistor to vcc = 3.3 V ELECTRONIC COMPONENTS

Metal Line Switches example for system controlled colors CPS Power Supply IN_LED_R IN_LED_G IN_LED_B GPIO GPIO GPIO uC_IN_LED_R uC_IN_LED_G uC_IN_LED_B GPIO GPIO GPIO uC_OUT_LED_R uC_OUT_LED_G uC_OUT_LED_B Touch Input Output Driver Lighting type Wire red Multicolor Singlecolor Wire green Wire blue Multicolor Singlecolor Blue Yellow Multicolor RGB Additive 2 Multicolor RGB Additive 3 Resulting Color Lettering Colour of Laser Lettering Material Lettering Colour Stainless Steel Filled letters Filled letters Multicolor variant when out 1 ≠ gnd when system is in sleep mode LED yellow: R=G=gnd, B:...

Metal Line Switches https://www.schurter.com /PG70 Laser Marking I H.SCHURTER ELECTRONIC COMPONENTS

Metal Line Switcheshttps://www.schurter.com /PG70 Configuration code for configuring customized variants (example) For customized variants a minimum order quantity of 100 pieces has to be fulfilled. Illumination Type RI = Ring Illumination single CWT = For area illumination tricolour Red Green Blue Cyan Magenta Yellow White Symbol 000 = None 001 - 077 (see table for laser lettering) please contact us for customer specific laser lettering Lettering 0 = No lettering (Symbol Code must be 000) 1 = Laser lettering Switching Function NO = Normally Open NC = Normally Closed LA = Latching Diameter 16...

Metal Line Switches https://www.schurter.com /PG70 Backlighted Backlighted Backlighted Ring Illumination Ring Illumination Ring Illumination Backlighted Backlighted Ring Illumination Ring Illumination Backlighted Backlighted Backlighted Ring Illumination Ring Illumination Ring Illumination Backlighted Backlighted Ring Illumination Ring Illumination Backlighted Backlighted Backlighted Ring Illumination Ring Illumination Ring Illumination Backlighted Backlighted Ring Illumination Ring Illumination Illumination Color active / inactive red / green red / green multicolor red / green red / green multicolor...