Catalogs >
SCHURTER >
CMF3, CMF6

CMF3, CMF6
1 / 2Pages

Catalog excerpts

Power entry modules without line filter www.schurter.com/PG05 IEC Appliance Inlet C6 with Line Switch 1-pole - Panel Mount: Screw-on mounting on PCB, from top or bottom - 2 Functions: Appliance Inlet Protection class I, Line Switch 1‑pole - For PCB mounting - Easy mounting with center bolt and snapper or srewed on PCB or housing - Electrical connection done on the PCB - Bi-positioning of the switch from left or right side, Standard CMF with switch on right side - With or without rear-side insulation cover - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Line switch with other rocker marking - Line switch on left of inlet Alternative: protection class II version pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, CADDrawings, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Material: Housing 2.5 A / 250 VAC; 50 Hz 6 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 PCB 1.6 mm Additional ground terminal Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch C6 acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class I Rocker switch 1-pole, non-illuminated, acc. to IEC 61058-1 Technical Details

Open the catalog to page 1

Power entry modules without line filter www.schurter.com/PG05 With insulation cover The size of the mounting cut-out can be selected as required. Fixation on PCB or housing from below Fixation on PCB or housing from above +0.30 1) self tapping screw D1 = 6.2 mm mounting from above / D1 = 3.6 mm mounting from below PC Board 1.6 mm / Dimensions without tolerance: ≤ 15 = ± 0.05 / > 15 = ± 0.10 Drilling diagram CMF6 mirror-inverted 1) self tapping screw Mounting side from below with cover from below with cover from below with cover from below Ground terminal Ground terminal direction Order...

Open the catalog to page 2