IEC Appliance Inlet C8 with Line Switch 1-pole CMF1 IEC connector C8 with line switch 1-pole PCB Mounting C8 <S® 70° C Description - Panel mount : Screw-on mounting on PCB , from top or bottom - 2 Functions : Appliance Inlet Protection class II , Line Switch 1 -pole - For PCB mounting See below: Approvals and Compliances Characteristics - Easy mounting with center bolt and snapper or srewed on PCB or housing - Electrical connection done on the PCB - Bi-positioning of the switch from left or right side, Standard CMF with switch on right side - With or without rear-side insulation cover - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Line switch with other rocker marking - Line switch on left of inlet References Alternative: polarized version or protection class I CMF2, CMF5; CMF3, CMF6 Weblinks pdf data sheet, html data sheet, General Product Information, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 2.5 A/250 VAC; 50 Hz 7A / 125 VAC; 60Hz Dielectric Strength > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- -25 °C to 70 °C rature IP-Protectionfrom front side IP40 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class II acc. to IEC 61140 TerminalPCB 1.6 mm Material: HousingThermoplastic, black, UL 94V-0 UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class II Line Switch Rocker switch 1-pole, non-illuminated, Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. ELECTRONIC COMPONENTS

Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: CMF Approval Logo Certificates VDE Approvals UL Approvals CQC Approvals Certification Body Description UL UL File Number: E96454 Product standards Product standards that are referenced Design Designed according to Designed according to Designed according to Designed according to Standard Description IEC 60320-1 Appliance couplers for household...

Power entry modules without line filter https://www.schurter.com /PG05 With insulation cover The size of the mounting cut-out can be selected as required. Fixation on PCB or housing from below Fixation on PCB or housing from above 1) self tapping screw 1) self tapping screw D1 = 6.2 mm mounting from above D1 = 3.6 mm mounting from below Mounting side Ground terminal Ground terminal direction Order Number from below with cover from below without cover with cover without cover Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER The...