Power Entry Modules with Line Filter www.schurter.com/PG06 IEC Appliance Inlet C14 or C18 with Filter, ECO design, Front- or Rear Side Mounting Screw-on mounting PCB snap-in version Snap-in mounting Quick connect terminals 6.3 x 0.8 mm Protection class II Screw-on mounting with wires (stranded) - Panel Mount: Screw-on version from front or rear side, snap-in version from front side, PCB Version from rear side - 2 Functions: Appliance Inlet protection class I or II, Line filter in standard and medical version - Solder, quick connect or wire (stranded) - PCB Mounting - Earth Terminal - VDE Certificate Number: 40016382 - UL File Number: E72928 - CCC File Number: 2010010204438235 - Compact high performance filter Optimal shielding due to completely closed filter case, unpotted - Designed for standard and medical applications Suitable for assembly in metal plated plastic housings - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Snap-in for panel thickness >2mm to 3mm - flexible wire with various lenghts - Class X1- and Y1-capacitors for enhanced withstand voltage - Medical version M80 - Variant with notch for V-Lock mating Cordsets Alternative: version without line filter 6100-3 pdf-datasheet, html-datasheet, General Product Information, RoHS, CHINA-RoHS, REACH, Mating Connectors, e-Shop, SCHURTERStock-Check, Distributor-Stock-Check, Accessories, Wire Harnessing Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Material: Housing 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Solder terminals Flexible wire AWG18 (15A AWG16), 150 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 2 mm (all steps with one variant) Themoplast / steel tin-plated, black / metallic, UL 94V-0 Line Filter C14 / C18 acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 3'000'000 h acc. to MIL-HB-217 F

Power Entry Modules with Line Filter www.schurter.com/PG06 Dimension Front or rear side mounting for screws with nuts or blind rivets (panel cutout for frontside mounting) 54.5 Rear side mounting with pre-formed, threaded holes for M3 screws (panel cutout for rear side mounting) Dimensions for class II version also apply to class I Snap-in mounting from front side Dimensions for class I version also apply class II

Power Entry Modules with Line Filter www.schurter.com/PG06 PCB snap-in rear side mounting, protection class I 48.6 PCB rear side mounting, protection class I 48.6

Power Entry Modules with Line Filter www.schurter.com/PG06 PCB snap-in rear side mounting, protection class II 48.6 PCB rear side mounting, protection class II 48.6 40

Power Entry Modules with Line Filter www.schurter.com/PG06 Screw and snap-in mounting with flexible wire 1) Flexible wire, standard length 150 mm or special length on request 2) Nonexistent for protection class II 3) Panel cut-out screw-on version, back-side mounting 4) Panel cut-out screw-on version, front- or back-side mounting 5) Panel cut-out snap-in version, front-side mounting Technical Data of Filter-Components Rated Current [A] Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Bleed Resistor Version Bleed Resistor Version Bleed Resistor...

Power Entry Modules with Line Filter Standard version Bleed resistor version 1) PEO—||i ^= R(^) i||—O-^XQ PE'2) 1) PEO—||i ^= Medical version M5, prot. class II Attenuation Loss Standard version . common mode ELECTRONIC COMPONENTS ^^^^^^^^^^^m

Power Entry Modules with Line Filter www.schurter.com/PG06 All Variants Rated Current [A] Standard Version Mounting side Protection Class Order Number Front Side Flexible wire Standard Version Front Side Quick connect Standard Version Front Side Quick connect Standard Version Front Side Quick connect Standard Version Front Side Quick connect Standard Version Front Side Quick connect Standard Version Front Side Standard Version Front Side Quick connect Standard Version Screw/PCB snap-in Rear Side Standard Version Screw/PCB snap-in Rear Side Standard Version Screw/PCB snap-in Rear Side Standard...

Power Entry Modules with Line Filter www.schurter.com/PG06 Mounting side Protection Class Front Side Quick connect Order Number Front Side Quick connect Front Side Quick connect Front Side Quick connect Front Side Quick connect Front Side Quick connect Screw/PCB snap-in Rear Side Screw/PCB snap-in Rear Side Rear Side Rear Side Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Rear Side Quick connect Rear Side Quick connect Rear Side Quick connect Rear Side Quick connect Rear Side Quick connect Rear Side Quick connect Rear Side Rear Side Quick connect Front Side...

Power Entry Modules with Line Filter www.schurter.com/PG06 Mounting side Protection Class Order Number Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER - 15 A version only according UL/CSA - Type for screw-on mounting from rear side has pre-threaded holes for M3 screws Suffix ".21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Packaging unit Accessories Description...