fmab cee CEE Connector yellow See below: Approvals and Compliances Description - Line filter in industrial version - 1 stage - high attenuation Unique Selling Proposition - First CEE power entry module with filter - Easy prewired solution - Universal flange for front or rear mounting - Optimal filter position direct on the power entry Characteristics - Protection against interference voltage from the mains Possible interferences generated in the equipment are strongly attenuated - Suitable for equipment with detachable power cord Weblinks pdf data sheet, html data sheet, General Product Information, Distributor-Stock-Check, Detailed request for product, Microsite Technical Data Ratings IEC16 - 32 A @ Ta 40 °C / 250 VAC; 50 Hz Line Filter Industrial Version, IEC 60939, UL 1283, Ratings UL/CSA 16 - 30 A @ Ta 40 °C / 125/250 VAC; CSA C22.2 no. 8 Leakage Currentindustrial < 1 mA (250 V / 50 Hz)_ MTBF> 200'000 h acc. to MIL-HB-217 F Dielectric Strength 2.25 kVDC between L-N 2.25 kVDC between L/N-PE Test voltage (2 sec) Allowable Operation Tempe- -40 °C to 85 °C rature Climatic Category40/085/21 acc. to IEC 60068-1 IP-ProtectionIP20 IEC 60529 Protection Class Suitable for appliances with protection class I acc. to IEC 61140 TerminalScrew clamps Material: HousingMetal Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FMAB CEE Approval Logo cTOus Certificates SEMKO Approvals UL Approvals Certification Body Description SEMKO Certificate Number; SE/09137-3 UL UL File Number; E72928 EMC Products H.SCHURTER 1 ELECTRONIC COMPONENTS

1-Phase Line Filters https://www.sohurter.com /PG84 Product standards Product standards that Organization are referenced Design Designed according to Designed according to Designed according to Designed according to Designed according to Description Passive filters for suppressing electromagnetic interference Standard for Attachment Plugs and Receptacles Electromagnetic interference filters General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard...

1) Line 2) Load 3) Blue 4) Yellow-Green 1) Line 2) Load . Attenuation Loss . . . . 0.1/100Ω differential mode - - - - 50Ω differential mode _____ 50Ω common mode Industrial version

1-Phase Line Filters https://www.sohurter.com /PG84 All Variants Rated Current @ Ta Rated Voltage [VAC] 50oC (40oC) [A] 16 110 Powerloss @ 25°C, Leakage Weight [kg] 50Hz [W] Current @ 400VAC, 50Hz [mA]1) 3 0.5 650 g Screw clamps [mm2] 2) Housings Packaging Order Number unit 4 4 10 10 I Most Popular. Availability for all products can be searched real-time; https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) Leakage current acc. IEC60950 - 5.2.3 - Annex D (situation when neutral is interrupted) 2) Maximum conductor cross section (wire gauge) to be used; a comparative table...