Hydraulic press systems
8Pages

{{requestButtons}}

Catalog excerpts

Hydraulic press systems - 1

Hydraulic press systems For superior part quality in the press shop

Open the catalog to page 1
Hydraulic press systems - 2

Hydraulic press systems For superior part quality in the press shop The versatility of hydraulic presses makes for a wide range of applications in the press shop. Innovative hydraulic solution ensure a high production capacity, reliable production and optimum part quality. Hydraulic system solutions at a glance Single presses Flexible application for a wide range of parts Transfer presses Economical production of complex parts at every stage Press lines Efficient and flexible series production in the automotive and supplier industry Die spotting and tryout presses Reliable die tryout...

Open the catalog to page 2
Hydraulic press systems - 3

FLEXIBLE APPLICATION FOR A WIDE RANGE OF PARTS Hydraulic single press systems Hydraulic single press systems can be loaded or unloaded manually or fully automatically. In combination with coil lines, destackers/blankloaders or tri-axis transfer systems, they can be used to create turn-key system solu- tions for cost- effective part production. Equipped with hydraulic bed cushions, cutting shock dampening, slide parallel- ism control and dynamic cylinder mode switching, hydraulic presses meet all the requirements for efficient production in the stamping plant. A data analysis system supports...

Open the catalog to page 3
Hydraulic press systems - 4

ECONOMICAL AT EVERY STAGE Hydraulic transfer presses In combination with tri-axis transfer systems, hydraulic transfer presses enable part production on multi-station transfer dies. High throughput rates can be achieved through innovative hydraulic solutions, such as the Schuier ring valve technology and dynamic cylinder mode switching. In single-slide or multi-slide design (with options for one or more bed and/or slide cushions) the capacity range forthese presses active electro-hydraulic slide parallel- ism control and hydraulic impact shock dampening functions ensure superior part...

Open the catalog to page 4
Hydraulic press systems - 5

EFFICIENT SERIES PRODUCTION IN THE AUTOMOTIVE- AND SUPPLIER INDUSTRY Hydraulic press lines Hydraulic press lines are mainly used to manufacture a wide variety of parts in small to medium lot sizes. Depending on the required forming operations, the line typically consists of between four and six single presses. The production process is fully automated from the blankto the finished component. Depending on the requirements, automation is provided by either conventional robots or Schuier Crossbar Robots. The control and visualization systems of the hydraulic press lines provide a user-friendly...

Open the catalog to page 5
Hydraulic press systems - 6

SAFE DIETRYOUT Hydraulic die-spotting and tryout presses Hydraulic tryout presses ensure short try- out phases by providing conditions very close to real-life production. The operator has the full rated capacity available any- where in the stroke, and can lower the upper die precisely onto the lower die as required. Sizes, performance specifica- tions and auxiliary equipment are all tailored to customer needs for die testing and pilot lot production. Capacities range presses - equipped with a hydraulic accumulator drive - simulate the slide motion of hydraulic and mechanical production...

Open the catalog to page 6
Hydraulic press systems - 7

RELIABLE MANUFACTURE OF ULTRA-HIGH-STRENGTH COMPONENTS Manufacturing systems for press hardening Press hardening (hot stamping) is a process used to manufacture of high- strength components. In this process, the parts are hardened through heat- ing, forming with hydraulic presses and controlled cooling in the die. Steels with starting tensile strengths of 500 to 700 1,600 N/mm2 during the process. After heating, robots or transfer systems transport the hot components into the die of the hydraulic press. The controlled cooling takes place in water-cooled dies. The required capacity of the...

Open the catalog to page 7
Hydraulic press systems - 8

More. Service from Schuler. Technical service Performance enhancement • Maintenance and servicing • Optimization • Machine inspection • Modernization • Safety inspection • Die and process technology • Preventive maintenance • Energy checks Training • Teleservice • Schuler Academy • Overhaul • Production start-up support • Machine relocation • Machine installations Used equipment Service worldwide: Germany • France • Great Britain • Italy • Switzerland • Slovakia • Spain • Czech Republic • Russia • USA • Mexico • Brazil • China • India Schuler SMG GmbH & Co. KG Louis-Schuler-Str. 1 68753...

Open the catalog to page 8

All SCHULER - MÜLLER WEINGARTEN catalogs and technical brochures

  1. Formmaster

    4 Pages

  2. Laser Lines

    4 Pages