Valve Seats Standard and Special Options

Standard and Special Seat Options* Standard Seat Cylindrical external diameter with a small clearance to match the vessel nozzle bore. The seat external diameter (Ø d1) is typically 1 mm less than the vessel bore. Seat with Recess Seat with a custom-made recess which allows the disc to sit below or in line with the inner surface of the vessel. Seat with Taper External diameter has a tapered face to allow easier removal from the vessel nozzle bore. Flat Seat ´x´=0 The seat removes narrow dead-space between the seat and vessel bore face, allowing enough space around the disc for full mixing of...

Seat with Contour Seat with a custom-made internal seat face to match the internal surface of the vessel, available even when that surface is not flat, symmetrical or regular. Inclined Seat Similar to the contoured seat but matched to the vessel/pipeline at any specific angle. Seat with Leak Detection By using an O-ring seal, any leakage through the By using an O-ring seal, any leakage O-ring area can be detected via continuous through the O-ring area can be sampling through a monitor tube detected via continuous sampling through the monitor tube, without the leak escaping to atmosphere. Seat...

La Tecnovalvo S.r.l. phone: +39 023 503 508 [email protected] SchuF Valve Technology GmbH phone: +353 21 4837000 [email protected] SchuF Benelux B.V. phone +31 25 12 34 448 [email protected] SchuF-Armaturen und Apparatebau GmbH phone: +49 6198 571 100 [email protected] SchuF Middle East F.Z.C. phone: +971 4 35 28 095 [email protected] SchuF South East Asia Pte. Ltd. phone +31 620 62 66 64 [email protected] SchuF Valves China Ltd. phone +86 27 83 316 569 [email protected] Your Local Agent: SchuF (UK) Ltd. phone: +44 203 355 2012 [email protected] SchuF (USA) Inc. phone: +1 843 881 3345 [email protected]...