Calibration resistors Resistor RKS Calibration resistor The calibration resistor type RKS is used to check the technical specifications of measuring bridges, ohmmeters, voltage divider circuits and current measurements by using voltage drop methods. The resistors are mounted in an aluminum case supporting 4-pole conector type outputs. Two connectors are used for measurement current line input, the other ones for measurement sense line connection. Standard banana plugs can be connected as well as open wire ends. For different needs two different resistor materials are available. Standard values: •1$ • 10 $ • 100 $ Other values are possible by request. Features RKS • Extra high precision resistor (4pole) • solid aluminum chassis • very low temperature coefficient Specifications of MANGANIN™ type resistor • Resistor material MANGANIN™ or ZERANIN™ Specific resistance Thermal voltage against copper Temperature coefficient Available accesories • Measurement cable 4pole, various lengths, banana plugs (4x) • DKD – calibration certificate from the ‚Deutscher Kalibrier- und Prüfdienst‘ Questions? Specifications of ZERANIN™ type resistor email: [email protected] Specific resistance Thermal voltage against copper Temperature coefficient Here you will get technical assistance as well as complete information regarding features, prices, shipment and reselling. MANGANIN™ and ZERANIN™ are registered trademarks of Isabellenhütte Heussler GmbH, Dillenburg, Germany SCHUETZ MESSTECHNIK GMBH, Rheinstrasse 7a, D-14513 Teltow 3. Edition August 2012. Changes are subject to change witho