Catalog excerpts
PWR1-3B Ratiometer 3 - PHASE for Power- and Distribution- Transformers T ransformer measuring devices Turns ratio meter Features • Ratio range from 0.8 to 2,500 • Full automated measurement • Measuring voltage 10 V / 100 V selectable • Display shows ratio, phase-angle, excitation voltage and magnetizing current • Easy to read large LC display for all three-phases with backlight • Built-in printer (optional) • Robust mobile case for field use The RATIOMETER PWR1-3B is constructed to measure the transformation ratio, phase error and magnetizing current of power- and distribution- transformers for all three-phases simultaneously. Voltage and current transformers are single phase, power transformers normally three-phase. Due to the bad quality on industrial lines (phase jitter and shifting, voltage differences between the three phases) all measurements normally are done single phase, even on three phase ratiometers. The design of the PWR1-3B contains an internal sinus power oscillator which delivers the necessary exciting voltage with very low distortion and stable voltage not found in industrial lines. This allows very stable and precise single- and three-phase measurements. The Ratiometer PWR1-3B uses a large LCD display with backlight to present the values of ratio and phase difference of “H.V. Winding” to “L.V. Winding” , and the excitation voltage and the magnetizing current of the high voltage winding. The instrument performs self calibration and different warning messages before each measurement in case of reversed connections and other failures. The instrument is battery-powered but can be driven by normal line voltage, too. A built-in printer is optional. Two test voltages can be preselected. A tap changer connection allows the forward changing of the tap changer automatically. The ratio range is selected automatically, too. Specification Ratio range Accuracy Resolution Phase angle Test voltage... ... and current Test frequency Input protection Error and ... ...warning messages Display Interface Printer Power supply Dimensions Weight Environment 0.2% of reading +/- 3d (0.08% of rdg. +/- 2d Opt.AC) 0.9 to 9.999:1 >> 0.001 / 10.1 to 99.99:1 >> 0.01 100:1 to 999.9:1 >> 0.1 / 1,000:1 to 4,000:1 >> 1 +/- 180.0° +/- 0.2° 10/100 VAC ( Other voltages on request ) 120 mA max. @ 100 V 50 Hz / 60 Hz (other frequencies as option ) Surge absorbers and fuses Continuity error (HV and LV) / Shorted windings Tap misconnections / Current error External voltage / HV-LV Reversal / Battery low Large LCD with back light, 7 lines of information USB 20 Character printout, 7 lines of information (Option) Mains 48.62 Hz, 90.260 VAC 25 VA ; Rechargeable battery for 6h operating ABS rugged case, W410x D330x H180mm. approx. 8.5 kg net 0.60°C not condensing email: sales@schuetz-messtechnik.com Here you will get technical assistance as well as complete information regarding features, prices, shipment and reselling. www.ohmmeter.de SCHUETZ MESSTECHNIK GMBH, Rheinstrasse 7a, D-14513 Teltow May 2013. Improvements are subject to change without notice. Made in Germany QCHUETZ ^9 MESSTECHNIK
Open the catalog to page 1All SCHUETZ catalogs and technical brochures
-
MRP 29 HY
1 Pages
-
Kelvin Clip 5Z
1 Pages
-
MR 1012 S
2 Pages
-
PWR3A
2 Pages
-
Kelvin clip 1Z / 4 Z
1 Pages
-
Resistor RKS
1 Pages
-
Kelvin test prod 4P
1 Pages
-
MR 270 C-A
2 Pages
-
PWR3A- (CVT)
2 Pages
-
MR5-200C MICRO-OHMMETER
2 Pages
-
MR 300 C-A
2 Pages
-
ML 1000
1 Pages
-
MAT 1000
1 Pages
-
MRC 100S–BD-3
2 Pages
-
MR – 1
1 Pages
-
MR12SPX
1 Pages
-
MAT 2000 T
1 Pages
-
PWD 3000 Cu / Cu-Al
2 Pages
-
MR 501
1 Pages
-
Kelvin lug 5k
1 Pages
-
Kelvin Clip K90
1 Pages
-
Kelvin Clip 5Z
1 Pages
-
Kelvin clip 3Z
1 Pages
-
MLS 7100
2 Pages
-
MR 8050
1 Pages
-
MRP 29 HY
1 Pages
-
PWD 2000 al-Co W/A/L
2 Pages