METAL SHEET TESTER MRP 29 HY ACCORDING TO DVS 2929-n and other international standards and regulations The surface stability and quality of pure, coated or chemical treated metal sheets of Al, steel, copper and alloys in terms of environmental impact can be tested due to the surface resistance. AL, steel, copper, other ... ● ● DVS 2929 (-1) standard Preadjusted + Calibrated For immediate use: Unpack - Power on - Start NEW: Both surfaces of the object can * be measured and displayed separately Std. range 1200µΩ, extended 100.0mΩ * * Option ID: T5_Sample Date: 22.11.2017, 10:11:29 Mode: DVS2929, force = 7500N, current flow time = 2s System Resistance [ohm] SYS1 = 6.9E-6 SYS2 = 7.0E-6 Probe Resistance including system resistance [ohm] R1 = 17.2E-6 R2 = 18.7E-6 R3 = 19.8E-6 R4 = 19.4E-6 R5 = 18.4E-6 Calculated Resistance: (R1..Rn)/n–(SYS1+SYS2)/2 [ohm] Rx = 11.7E-6 Quality made in Germany Contact us for more information: Phone: +49 3328 3179-0 E-Mail: [email protected] www.ohmmeter.de SCHUETZ MESSTECHNIK GMBH, Rheinstraße 7d, 14513 Teltow, Germany ---- Flyer