MR12SPX

MR12SPX

Product catalog summary
Introduction: The MR12-SPX and its measuring probe are designed for the inspection and quality control of carbon strips in current collectors used by electrically powered trains, trams, and trolley buses. These collectors are typically roof-mounted, and the compact design of the probe allows it to fit in the limited space between collectors.
Measurement Principle: The device measures electrical resistance in micro-ohms (µΩ) or milliohms (mΩ) between the aluminum fixing rail and the conducting carbon layer. Changes in resistance can indicate wear or improper bonding, which may lead to adhesive failure.
Features: The MR12-SPX provides accurate and reproducible results even under conditions of heavy wear and contamination. It is battery-powered, portable with a shoulder strap, and stores measurement values internally for later transfer to a PC.
Technical Specifications:
  • Automatic Ranges with resolutions of 1 μΩ at 1mΩ and 10μΩ at 10mΩ.
  • Maximum error: ±0.1% of range, ±1 digit.
  • Maximum resistance: 18 mΩ (80% over range at 10mΩ).
  • Measuring current: 1 ADC.
  • Resistance control with an external reference resistor.
  • Interfaces: RS232C for accessing stored test results (up to 2000 values).
  • External power supply: 100-240 VAC; Internal power supply: Battery with 2950mAh.
  • Weight and Dimensions: MR12-SPX - 3.3 kg, 260 x 100 x 310 mm; Probe - 0.8 kg, 76 x 130 x 102 mm.
Contact Information: For more details, contact SCHUETZ-MESSTECHNIK GmbH via phone, fax, or email, or visit their website.
See more

Catalog excerpts

MR12SPX-1

To measure the contact resistance of carbon strips of current collectors used by trains, electric trams and trolley buses The MR12­SPX and its measuring probe are used for inspection and quality control of carbon strips of current collectors used by electrical powered trains, electric trams, trolley buses and similar vehicles. Here the current collectors are preferably roof mounted. Due to the often pairwise mounting of the carbon strips, there is little space between the lowered collectors. Therefore the measuring probe itself is very small. The design can be modified for your needs. The measured variable is the electrical resistance in µΩ or mΩ between the aluminum fixing rail (bottom) and the conducting carbon layer (top). The measured resistance changes due to wearing of the carbon strip or not correct (conductive) bonding of carbon layer and fixing rail. Overload, incorrect bonding or other overstraining can cause separation or failure of the adhesive bonding. Through the measuring principle and the special contacting the MR12­SPX can achieve accurate and reproducible results, even if the aluminum fixing rail is very dirty due to heavy wearing and flying sparks. The equipment is battery powered and has a shoulder strap for easy carrying. The measurement values are internally stored and can later on be transfered to a PC. μ­Ohmmeter with easy to handle probe Technical Specifications: Automatic Ranges: Resolution: Max error: Maximal resistance: Measuring current: Resistance control: 1 ADC with external reference resistor RS232C for accessing the internal stored test results (2000 values) Power supply external: 100 ­ 240 VAC Power supply internal: Battery with 2950mAh Weight MR12­SPX: 3.3 kg Dimensions MR12­ 260 x 100 x 310 mm SPX: (WxHxD) Weigth Probe: Dimensions Probe: Contact us for more information: Phone: +49 (0)3328 / 3179 ­ 0 Fax: +49 (0)3328 / 3179 ­ 10 E­Mail: sales@schuetz­messtechnik.com www.ohmmeter.de SCHUETZ­MESSTECHNIK GmbH, Rheinstraße 7d, 14513 Teltow, Germany April 2018. Changes are subject to change without notice.

 Open the catalog to page 1

All SCHUETZ catalogs and technical brochures

  1. MRP 29 HY

    1  Page

  2. MR 1012 S

    2  Pages

  3. PWR3A

    2  Pages

  4. MAT 1000

    1  Page

  5. MR 300 C-A

    2  Pages

  6. MR 270 C-A

    2  Pages

  7. Resistor RKS

    1  Page

  8. PWR3A- (CVT)

    2  Pages

  9. ML 1000

    1  Page

  10. MR – 1

    1  Page

  11. MAT 2000 T

    1  Page

  12. MR 501

    1  Page

  13. MLS 7100

    2  Pages

  14. MR 8050

    1  Page

  15. MRP 29 HY

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.