MR – 1
1Pages

hand - held product for surface resistances Using a special 4-pole contact probe the MR-1 is used for the determination of a sufficient electromagnetic compatibility of metal-coated plastic cases. The MR-1 is small, easy to handle and is powered by a battery or an accumulator. The different specific resistances are specified by selecting one of the pre-programmed materials, or by measuring the specific resistance of unknown materials and entering the result. Preferably the coat thickness is displayed, but the measurement and display of the actual resistance, the square resistance and the specific resistance is possible, too. All measured values can be transmitted into a PC via a serial interface. Controlling the MR-1 on the other hand is not possible. Multi purpose resistance meters Surface resistance meters • Surface resistance measurement • Coat thickness measurements from 0.01 $m up to 100 $m1 Resistance measurement Range Resolution Range automatic Measuring error Measuring current Range selection Result display Measuring speed 10 mfi - 1000 Q, decadic 10 pQ switchable ± 0.2% of reading ± 2 digit max. 100 mA automatically or by using the keypad 3 % digits approx. 900 ms (without automatic) • Measurable specific resistances from 1 $Qcm - 100 mQcm1 • Resistance measurement, measuring range from 10 mQ -1000 Q, decadic • Measure range automatic, switchable • Resolution of 10 $Q • Measuring error ± 0.2 % of reading Coat thickness measurement Measurement scale Measuring error Result display 0.01 pm - 100 pm 1 ± 0.5% of reading max. 2..3 digits (depends on actual value) • Including 14 pre - programmed material presets • Including special measuring probe and serial interface cable Error indication Current error Sense error Range overrun Parameter setup Interface Dimensions Power supply Weight before EVERY measurement Display: ,Current‘ Display: ,Sense‘ Display: ,Range‘ by using keypad RS-232C (Transmit measured values only!) Baudrate fixed to 2400 Baud 50 x 80 x 35 mm (WxHxD) 9V internal battery or line voltage adapter approx. 600 g email: sales@schuetz-messtechnik.com Here you will get technical assistance as well as complete information regarding features, prices, shipment and reselling. www.ohmmeter.de SCHUETZ MESSTECHNIK GMBH, Rheinstrasse 7a, D-14513 Teltow 6. Edition August 2012. Changes are subject to change without notice. These results and limits are only calculated from the measured and specific resistanc