Catalogs >
SCHUETZ >
MAT 1000

MAT 1000
1Pages

Catalog excerpts

for cable diameters from 0,1 mm2 to 100 mm2 devices The MAT1000 resistance measurement holding device is used for the measurement of the electric resistance of samples of cables, wires or other material during the inspection of incoming goods, manufacturing control applications and quality control. The test object, the so-called meter sample of a cable or wire is fixed in the holding device, and the electric resistance between the two potential taps, which have a distance of exactly 1000 mm, is guaranteed by the distance between the potential tap and the supply terminals. It is roughly eight times the largest allowable diameter. Features • Holds diameters from 0,1 mm2 t0 100 mm2 • Max. current of 100 A • precise distance between potential tap of 1000 mm In particular in combination with instruments of the MR200/250/300C-A series, electric resistances ranging from less than 100 mQ up to 200 mQ per meter can be measured with the MAT1000, which corresponds to cable sizes ranging from approx. 0.1 mm2 up to more than 100 mm2. An even current distribution, which is a pre-condition for highly accurate measurements, is guaranteed by the distance between the potential tap and the supply terminals. It is roughly eight times the largest allowable diameter. Available accesories • certificate Technical data Allowable cable sizes Distance between potential taps Connection of potential taps Supply terminals max. current Dimensions Weight email: sales@schuetz-messtechnik.com Here you will get technical assistance as well as complete information regarding features, prices, shipment and reselling. www.ohmmeter.de SCHUETZ MESSTECHNIK GMBH, Rheinstrasse 7a, D-14513 Teltow 3. Edition August 2012. Changes are subject to change without notice.

Open the catalog to page 1

MAT 1000 1Pages

Catalog excerpts

All SCHUETZ catalogs and technical brochures

MAT 1000
1Pages