Kelvin test prod 4P
1Pages

{{requestButtons}}

Catalog excerpts

Kelvin test prod 4P - 1

Connector equipment The Kelvin test prod is used for two-pole contacting of connections or contacts which are difficult to reach, e.g. lamellae at the commutator of a motor, ground connections between components which are very close together or simply smooth surfaces where there is no other way of contacting. Using two Kelvin test prods, a 4-pole contacting can be realised where the contact and supply line resistances have no influence on the test result. Test prods Of course, you can also use the Kelvin test prod together with a Kelvin clipper or another two-pole connection to the measuring instrument, to obtain a 4-pole connection to the test object. The Kelvin test prod is of a robust design, a comfortable plastic handle supports the two coaxially arranged contact tips. The inner contact consists of a round material with a corresponding spring-mounted tip, the outer contact comprises a bevel-cut tube. The outer contact is used as the potential contact, the inner contact is used as the current contact. When a test surface is contacted, the spring-mounted inner current contact touches the surface before the external potential contact. When the test prod is removed, this process is reversed, so that the current contact is always the first and the last contact. This is important in the case of inductive test objects in order to avoid that the voltage input of the measuring instrument, which is always more sensitive, is exposed to inductive voltage surges when the test prod is disconnected. The connecting cable is screened, therefore there are three plugs or a th re e-pole plug (depending on customer's specification) on the test instrument side, one of which connects the screen to ground. • For different to reach contact surfaces • 70 mm contact shaft • Test spikes made from stainless steel • Including protective ring • Including start button Available accesories • Several cables and connectors available Outer contact diameter Inner contact diameter Contact pressure (inner tip // outer ) Length of contact shaft email: sales@schuetz-messtechnik.com Here you will get technical assistance as well as complete information regarding features, prices, shipment and reselling. www.ohmmeter.de Material Length of handle Diameter of handle Dimensions of protective ring Material of handle Kabellange stainless steel 125 mm 24 mm 24 mm x 40 mm shock - proof plastic 150 cm approx. 500 g without Cable SCHUETZ MESSTECHNIK GMBH, Rheinstrasse 7a, D-14513 Teltow 3. Edition August 2012. Changes are subject to change without notice.

Open the catalog to page 1

All SCHUETZ catalogs and technical brochures

  1. MRP 29 HY

    1 Pages

  2. MR 1012 S

    2 Pages

  3. PWR3A

    2 Pages

  4. Resistor RKS

    1 Pages

  5. MR 270 C-A

    2 Pages

  6. PWR3A- (CVT)

    2 Pages

  7. MR 300 C-A

    2 Pages

  8. ML 1000

    1 Pages

  9. MAT 1000

    1 Pages

  10. MR – 1

    1 Pages

  11. MR12SPX

    1 Pages

  12. MAT 2000 T

    1 Pages

  13. MR 501

    1 Pages

  14. MLS 7100

    2 Pages

  15. MR 8050

    1 Pages

  16. MRP 29 HY

    1 Pages