Maximum productivity and accuracy in gas leak detection with the vehicle-based measurement station "Scout VGS 4500" from Schütz Gas pipe network inspection work has so far been carried out on foot. The new regulations G465-1 to G465-4 now also allow to use vehicle-based systems. With the mobile measuring unit "Scout VGS 4500" from Schütz, a system is now available which allows you to carry out the gas leak detection in accordance with the new regulations. The "Scout VGS 4500" is easy to use and can be employed in a modular way with different vehicle types. It has already proven to be practical and reliable in the most difficult of environments, such as the deserts in Peru. C:\Users\Asus\Documents\Schuetz Messtechnik\Scout VGS 4500\Artikel-Scout-VGS-4500_b English.odt

G465-1: Paragraph 7.2.1 Vehicle-based measuring systems for above-ground checking of gas pipes for leaks can be used above the pipe run. Up to now, the above-ground inspection of the gas pipe networks has been carried out with the carpet probe and measuring device following the buried pipes. The vehicle-based measuring station "Scout VGS 4500" fulfills the requirements of the regulations and improves the previously known sensitivity by factors, thus significantly increasing the quality of vehicle-based gas leak detection. Together with the associated software, the documentation quality of the...

With the "Scout VGS 4500" measuring system from Schutz, very large sections of network can be checked in a short time and the results can be documented. Practical measurements have shown that speeds of up to 50 km / h are possible with the vehicle-based measuring system. Even under the most difficult conditions, the Scout VGS 4500 has proven its reliability. For the end customer, the system was successfully subjected to a resistance test in the desert at an outside temperature of over 36 degrees. The "Scout VGS 4500" measuring station was designed to be easy to install and use. This allows operations...