LED-Steep roof light fitting Series 185... Applications: Industrial, tradesmen's and commercial facilities with extreme conditions, aggressive environments (e.g. oil, grease) or high mechanical exposure, spray booths and spraying rooms (not EX), sand blasting rooms (SSK-versions) etc. Design: Housing: Sheet steel, light grey, powder coated (RAL 7035). Safety glass: Frameless, clear, internal hinge, tiltable. Reflector: Hinged; white painted sheet steel; detachable, with LED-modules and frosted glare limitation modules. Central locking: Internal, to be opened from outside with 5mm allen key, inner hinges on the opposite side. Cable entries: 3 x M25 (2 cable gland and 2 blanking plugs), looping the cable at one side possible. Mechanical installation: Mounting accessories see spare parts/ accessories. Note: This light fitting is not suitable for application in areas with permanent high humidity in combination with only short periods of operation, such as sewage or stormwater retention bassins or water treatment plants. Technical data: LED: Line-modules 4,000K; CRI>80, life expectancy Lg0 > 50,000 hours (at max. ambient temperature) ECG: 220-240V, 50/60Hz, overload and short circuit protection Ambient temperature: -20°C up to see table of articles respectively - for use in sand blasting locations or cabins (SSK) - in stainless steel, powder coated Product highlights: • extremely flat and robust design • smooth housing with all latches inside the housing • comfortable central locking system with internal hinges • perfect protection of the LED from mechanical or electrostatic damages through glare limitation elements on top the led • homogeneous, glarefree Illumination with frosted glare limitation elements, no individual light points visible, comfortable perception of light • high colour rendering CRI > 80, according to the work place guidelines suitable for nearly all branches • with „D"-sign, therefore suitable for application in rooms/locations with increased fire risk due to flammable dusts • retrofittable Frame for Recessed Installation and Swivel Arm Mounting System (modular construction) • inexpensive able looping possible • ECG and reflector with LED-modules replacable by qualified personnel on-site • future-proof due to use of standardized LED-modules (Zhaga) * see notes ** The given information is for rough orientation only. In each individual case a lighting calculation is necessary. I Notes: Properties, limitations and details for controlling LED-light fittings: See „Technical Supplement". All technical data is relevant at the time of print. Actual technical data can be found in the internet under www.schuch.de. Subject to technical changes, misprints and errors.

Installation dimensions Frame for Recessed Installation Mounting by means of M5 bolts to the long sides of the housing (see drawing). Article No. Type I 18091 0021 I EB 82. 12L I frame for narrow housing for 185 12L Attention: When planning the opening for recess installation please allow additional clearance for the cable glands. Dustproof/Waterproof Light Fittings Swivel Arm Mounting System Light fittings of series 185.. can be equip- sion points at the upper side of the ped with a swivel arm mounting system housing. Swivel range: ± 75° at any time. (see dimensions in diagram). The swivel arms...