Light Management Explosion-Proof Light Fittings Dust- and Waterproof Light Fittings High Bay Light Fittings Outdoor Light Fittings Emergency Light Fittings

Wireless Light Management System Light only where it is needed, only when it is essential, only as bright as necessary and only as long as it is required - with the help of a light management system, the efficiency potential of LED technology can be optimally exploited. Intelligent, demand-controlled light saves a great deal of energy costs and is extremely environmentally friendly and sustainable thanks to the considerable reduction in CO2 emissions associated with - Light Fittings Luminaires that are prepared for retrofitting light management components and sensors. Directly with the new installation...

System versions With USB dongle and software The light fittings can be operated independently without a server. Programming and any subsequent adjustments, are done on site using a laptop lland USB dongle 0. Up to 250 light fittings can be controlled and read out by each USB dongle. After setting up / programming, the luminaires work completely independently. If required, the programming can also be factory-made. Controller in each light fitting Automatically organised mesh network 2.4 GHz band Comprehensive encoding + PIN code protection Field access via radio using Laptop and USB - dongle Light...

• Freely configurable dimming profiles based on time of day, duration, dimming level and motion profile • Real-time access to the light fittings for Instant-On or to alter dimming profiles as required • Integrated constant luminous flux function to keep the luminous flux constant over the LEDs' entire service life • Energy consumption metering Optional: • motion detection with a motion sensor (Light on Demand) • optimised On/Off with daylight sensor • time, date, parameter and positon monitoring via GPS receiver and GPS-enabled control unit, together with automatic failure notifications with...

Light Management - Light Fittings Intelligent light control right from the start Ligth Fittings in LIMAS version are factory-fitted with all the required light management components. No further modifications need to be made to efficiently illuminate streets, squares, cycle paths or halls. Almost all outdoor and hall light fittigs from the SCHUCH portfolio are available in LIMAS version. In general the following versions are possible • LMS • LMS IR • LMG • LMG IR standard version with radio antenna with an additional infrared sensor for a needs-based Light control (Light on Demand) with GPS antenna...

- Light Fittings Ready for the future You have the choice - you determine the timing, because luminaires in RFL version (Ready for Light Management System) are prepared for retrofitting light management components and sensors. One or two Zhaga-compliant sockets integrated into the light fitting housing enable the required components to be installed at a later date without tools. The use of autonomous sensors without a connection to a light management system is also possible with the RFL luminaires at any time. Thanks to the standardization of the base according to Zhaga Book 18, you are not tied...

Other sensors e.g. environmental sensors (fine particle, CO 2 , weather station) on request. Control Components USB dongle + software with license (1) An annual hosting fee applies to the gateway. Light Management Advantages • implementation of a light management system is possible at any time • tool-free, quick and easy installation of the light management system components g simply screw off the socket cap and screw on the system component • standardized Zhaga-compliant sockets allow a free choice of the light management system • in case of using the LIMAS light management system, LIMAS light...

Wired DALI Light Management System Diverse activities in a room, different frequentation of areas and zones as well as day and season changing lighting conditions hold a high energy and CO2 saving potential in lighting. Individually adapted light through intelli- Subject to technical changes, misprints and errors. gent lighting control is not only of great advantage from an economic and ecological point of view, it also focuses on the different needs of people. LIMAS - Line is available in two different versions: • BASIC - standard version • PRO - extended version

Line BASIC LIMAS Line BASIC enables fully automated, dynamic light and thus offers a high degree of individuality. The sensors register every deviation from the predefined values and report them to the controller, which reacts immediately. If, for example, the proportion of daylight changes, the lux value of the artificial light is adjusted accordingly. Swirching on / off in the event of presence or absence is fully automated too.It is also possible to link the light settings of different zones and rooms with one another. The user himself does not notice the lively communication between the sensors...

LIMAS Line PRO enables an easy addressing and grouping of luminaires, the integration of standard pushbutton switches and sensor-based automation. In addition to DALI (DIMD) light fittings, this system can also be used to control and monitor all self-contained emergency light fittings (MA-Z, DIMDI and DI) in the SCHUCH portfolio. The configuration and control is done by PC without additional software - a browser is sufficient. The conjunction between a PC and LIMAS Line PRO can either be via an existing network or by establishing a peer-to-peer connection. There is no internet connection required...

Light Management High Bay light fittings control by using the calendar function In addition to full days, time-specific settings can also be selected. It makes sense if e.g. the complete lighting should be switched to 100% in a company during core working hours. Subject to technical changes, misprints and errors. Integration of emergency luminaires with self-contained batteries Emergency luminaires can be used with the following three types of circuit: Continuous light, standby light and controlled light.