LUXANO 2 Dustproof/Waterproof LED Series 167 ... G2 Light Fitting with Diffuser Applications: In humid, wet and dusty indoor areas of industrial and agricultural premises, for workshops and car parks, hard to reach areas, areas with high downtime and maintenance cost when replacing the lamps. Aggressive atmospheres: Please consult us. Design: Housing: Glass fibre reinforced polyester resin, foamed polyurethane gasket. Diffuser: PMMA, frosted for glare limitation. Closures: stainless steel, in order to ensure the protection against contact. The light fitting can be opened with a tool only. Reflector: Painted, removable, completed with electronic components. Electrical connection: 3-pole terminal block. Cable entries: Variable, closed knock-outs on the short and long sides, and on the top, 2 blanking plugs M20. Mounting system: 2 retaining clips made of stainless steel, 2 bracket for chain suspension (part of the delivery) Technical data: Notes: 1. In case of horizontal installation, the light fitting must be directly fixed with screws (washer and pressure disk are included) or it must be mounted with a reinforced retaining clips (see accessories)! 2.The light fitting is not to be used in areas with high mechanical stress (wind) or seldom usage (i.e. maintenace and inspection only). 3. We recommend our series 144... in AUS-version or a weather roof within very critical environmental conditions. (Properties, limitations and details for controlling LED-light fittings: a See "Technical Supplement" All technical data is relevant at the time of print. Actual technical data can be found in the internet under www.schuch.de. Subject to technical changes, misprints and errors. ECG: 220-240V, 50/60Hz LED: Linear modules 4,000k, CRI > 80, life time L80 > 50,000h at max. ambient temperature (see notes) Ambient temperature: -20oC up to +350C Options: - through wiring - quick-connector „Fast Connect" (FC) - ECG with DALI interface for dimming (DIMD) - cable looping (RR) - for connection to group or central battery systems (ZB) or emergency mains respectively Product highlights: • quality product with high-quality components from well-known manufacturers • homogeneous illumination by using frosted diffusers, no individual light spots visible, comfortable perception of light and excellent glare limitation • "D"-symbol, suitable for rooms with increased fire risk • Closures made of stainless steel • variable cable entries, closed knock-outs on the short and long sides, and on the back • FastFix quick-action mounting system, with retaining clips made of stainless steel for variable mounting distances, without opening the fitting. • no throw-away light fitting - resource-saving and environmentally friendly for application in unprotected outdoor areas Applications: In protected and unprotected outdoor areas, mounted to walls, ceilings, catwalks, under canopies, bus stops, train stations, subways, construction sites, etc. Design: As type 167... G2, but: Diffuser: UV proof Dustproof/Waterproof Light Fittings LED ip65 Gasket: silicone Pressure compensation element: M20 Entries: 1 gland M20 at one small side, pressure compensation element M20 at the other small side. Mounting system: 2 reinforced retaining clips (also suitable for horizontal wall mounting) made of stainless steel (part of the delivery) * The given information is for rough orientation only. In each ** see notes Individual case a lighting calculation is necessary.

Notes: The light fittings in Version IFS are not suitable for cleaning with cleaning agents or disinfectants as well as the cleaning with water-jet units. Applications: Design: Food industry or food processing factories, suppliers to Same as type 167... G2 but: the food industry who are falling in the International Diffuser: cover Polycarbonate, frosted. Featured Standard Food, BRC, HACCP or who are subject to comparably strict requirements. for application in stables and agriculture farming Design: Same as type 167... G2 but with corrosion-proof and highly ammonia-resistant components. Gasket:...