ation. Clips: Single-piece plastic clips (KK). Reflector: Aluminium painted, detachable, carrying the electrical components. Connection terminal: 3 poles Cable entries: Variable, at the ends and top of the housing, 2 plugs M20. Mounting system: 2 holes for ceiling mounting. Sealing and pressure disks are supplied inside the fitting. Compact Dustproof/Waterproof LED-Light Fitting Series 164KL... Generation 2 Applications: Humid, wet and dusty, small interior areas, walkable low temperature cabins, restaurants, supermarkets, hotels etc., above doors, entrances and exits, roofed outdoor areas etc. (aggressive agents -please consult us). Design: Housing: Glass fibre reinforced polyester, foamed silicone gasket. Diffuser: PMMA frosted for glare limit Technical data: LED: Line modules, 4.000K, CRI > 80, life cycle of the LED Lg0 > 50.000h. ECG: 220-240V, 50/60Hz, overload and short circuit protection. Ambient temperature: -20°C up to +30°C Options: - for connection to 24V DC-supply (Type 164KLL08G2) - for connection to group or central battery systems (ZB) or emergency mains respectively- for higher/lower ambient temperatures - stainless steel clips (KE) - cable entries up to M25 x 1.5 - cable looping at 1 small side - purpose of signalization with coloured LED Dustproof/Waterproof Light Fittings Product highlights: • homogeneous illumination by using frosted diffusers, comfortable perception of light and brilliant glare limitation • high colour reproduction CRI > 80, according to the guide lines for worplaces suitable for nearly all plant locations • with "D"-symbol, suitable for rooms with increased fire risk due to deposits of combustible dust and fibrous materials • no throw-away light fitting, ECG and reflector with LED-module may be replaced by qualified personnel on-site • future proof by using LED-modules according to Zhaga standard Subject to technical changes, misprints and errors.